Interior Designer Jobs in Tunisia

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The consultant will contribute to the preparation of interior design plans for the homes built and distributed by the government to vulnerable families with a member who has a disability. The homes were constructed as part of the National Social Housing Program. The renovation work will focus on adapting these housing units to the specific type of disability. This will be done in consultation with UN-Habitat, the Tunisian Ministry of Equipment and Housing.</p><p><br></p><p>The Specific Program for Social Housing led by the government of Tunisia aims to eradicate 10,000 rudimentary dwellings and replace them with decent housing, noting that 7,353 dwellings have so far been delivered to beneficiaries, in addition to the distribution of 13,400 social housing units and lots. This specific program does not accommodate the universal needs of the People with disabilities. For this reason, the project has identified two main pilot areas which require attention and intervention of the project.</p><p>Reporting Line The consultant will be working under the direct supervision of the Head of Tunisia office</p><p>Duties and Responsibilities Under the overall supervision of the Head of UN-Habitat Tunisia office in close coordination with the project team and Ministry of Equipment and Housing team, the expert will prepare the interior design of housing, propose the improvement of the access to the house unit and the installation of external equipment. The consultant will undertake the following duties and responsibilities:</p><p>1. Housing Assessment and Accessible Interior Design Plan for the Beneficiary</p><ul><li>Conduct an assessment of the beneficiary s housing situation and how it meets the needs of the person with a disability</li><li>Develop an interior design plan for the house to make it suitable for the beneficiary's mobility and access.</li></ul><p>2. Coordination and Oversight of Accessibility Modification Works and Implementation Activities</p><ul><li>Planning and Coordination of Accessibility Works</li><li>Liaise with contractors, suppliers, and relevant stakeholders.</li><li>Schedule and coordinate all approved housing modification activities.</li><li>Monitoring and Quality Assurance of Implementation</li><li>Supervise the progress of works to ensure compliance with the approved design and accessibility requirements.</li><li>Conduct inspections and verify that completed modifications meet the beneficiary s mobility and access needs.</li></ul><p>3. Capacity Building on Inclusive Design Standards for Different Types of Disabilities</p><ul><li>Develop and Deliver Training on Disability-Specific Design Standards</li><li>Provide training on accessibility and universal design principles for different disability types (physical, visual, hearing, intellectual, and psychosocial disabilities).</li><li>Adapt training materials to the needs of beneficiaries and NGOs.</li><li>Practical Guidance and Awareness Sessions</li><li>Conduct workshops and demonstrations on applying inclusive design standards in homes, community facilities, and service environments.</li><li>Strengthen the capacity of beneficiaries and NGOs to identify and advocate for accessible and disability-inclusive solutions.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>An advanced university degree (master s or equivalent) in Architecture, or a related field is required. A first-level university degree, combined with two (2) additional years of qualifying experience, may be accepted in lieu of an advanced university degree.</li><li>At least 5 years of professional experience in Architecture is required.</li><li>Experience working with governments and participatory planning processes is desirable.</li><li>Experience in designing and piloting works for people with disabilities, is desirable.</li><li>Fluency in oral and written Arabic and French is required.</li><li>Knowledge of English is an asset.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Result of Service<br>The consultant will contribute to the preparation of interior design plans for the homes built and distributed by the government to vulnerable families with a member who has a disability. The homes were constructed as part of the National Social Housing Program. The renovation work will focus on adapting these housing units to the specific type of disability. This will be done in consultation with UN-Habitat, the Tunisian Ministry of Equipment and Housing.<br> Work Location<br>Tunis, Tunisia<br> Expected duration<br>12 months<br> Duties and Responsibilities<br>Organizational Setting The mandate of the UN-Habitat Sub-Regional Office in Tunisia is to provide policy advice, technical cooperation and capacity building, especially to empower and support the most vulnerable populations. In line with the key impact area of UN-Habitat's Strategic Plan 2026 - 2029 by identifying SDG localization and participatory multilevel governance as one of its key means of implementation. With a focus on delivering adequate housing, basic services and land for all, the Strategic Plan recognizes that accelerating the 2030 Agenda requires stronger multilevel governance collaboration, inclusive governance systems that engage communities, and the scaling up of local and regional solutions to drive systemic transformation. Tunisia is home to more than 500,000 Persons with different types of disabilities. People with disabilities experience multiple and intersecting forms of social, economic, and political exclusion, which leads to deprivation in access to education, clean water and sanitation, shelter, and waste of human and productive potential. The strains of institutional (affordable housing, services, land rights), structural (gender, age, ethnicity), and spatial (regional imbalance, mobility, congestion, recreation) inequalities are pushing the vulnerable, marginalized, and impoverished into intergenerational cycles of exclusion. People with disabilities are often not ‘planned for’ as the default intended users and inhabitants of cities and their public spaces, which is reflected in the planning, designing, and maintenance of urban spaces and facilities. This is exacerbated by the lack of participatory and people-centric planning processes, as well as the limitation of accurate disaggregated sex and disability data, especially concerning women and girls with disabilities. There is a limited sensitization, awareness, and technical capacity in understanding the diverse requirements of Persons with disabilities, and how these requirements would be incorporated in the urban development agenda. This holds both in the public sector as well as among private sector players involved in ground-level housing implementation in the country. The Specific Program for Social Housing led by the government of Tunisia aims to eradicate 10,000 rudimentary dwellings and replace them with decent housing, noting that 7,353 dwellings have so far been delivered to beneficiaries, in addition to the distribution of 13,400 social housing units and lots. This specific program does not accommodate the universal needs of the People with disabilities. For this reason, the project has identified two main pilot areas which require attention and intervention of the project. Reporting Line The consultant will be working under the direct supervision of the Head of Tunisia office   Duties and Responsibilities Under the overall supervision of the Head of UN-Habitat Tunisia office in close coordination with the project team and Ministry of Equipment and Housing team, the expert will prepare the interior design of housing, propose the improvement of the access to the house unit and the installation of external equipment. The consultant will undertake the following duties and responsibilities: 1. Housing Assessment and Accessible Interior Design Plan for the Beneficiary • Conduct an assessment of the beneficiary’s housing situation and how it meets the needs of the person with a disability • Develop an interior design plan for the house to make it suitable for the beneficiary's mobility and access. 2. Coordination and Oversight of Accessibility Modification Works and Implementation Activities Planning and Coordination of Accessibility Works • Liaise with contractors, suppliers, and relevant stakeholders. • Schedule and coordinate all approved housing modification activities. Monitoring and Quality Assurance of Implementation • Supervise the progress of works to ensure compliance with the approved design and accessibility requirements. • Conduct inspections and verify that completed modifications meet the beneficiary’s mobility and access needs. 3. Capacity Building on Inclusive Design Standards for Different Types of Disabilities Develop and Deliver Training on Disability-Specific Design Standards • Provide training on accessibility and universal design principles for different disability types (physical, visual, hearing, intellectual, and psychosocial disabilities). • Adapt training materials to the needs of beneficiaries and NGOs. Practical Guidance and Awareness Sessions • Conduct workshops and demonstrations on applying inclusive design standards in homes, community facilities, and service environments. • Strengthen the capacity of beneficiaries and NGOs to identify and advocate for accessible and disability-inclusive solutions.<br> Qualifications/special skills<br>An advanced university degree (master’s or equivalent) in Architecture, or a related field is required. A first-level university degree, combined with two (2) additional years of qualifying experience, may be accepted in lieu of an advanced university degree. At least 5 years of professional experience in Architecture is required. Experience working with governments and participatory planning processes is desirable. Experience in designing and piloting works for people with disabilities, is desirable.<br> Languages<br>Fluency in oral and written Arabic and French is required. Knowledge of English is an asset.<br> Additional Information<br>Not available.<br> No Fee<br>THE UNITED NATIONS DOES NOT CHARGE A FEE AT ANY STAGE OF THE RECRUITMENT PROCESS (APPLICATION, INTERVIEW MEETING, PROCESSING, OR TRAINING). THE UNITED NATIONS DOES NOT CONCERN ITSELF WITH INFORMATION ON APPLICANTS’ BANK ACCOUNTS.<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>RemoFirst is transforming the way businesses hire and manage global teams.<br> Our mission is to enable Freedom of Work by providing an all-in-one global HR platform that simplifies hiring, compliance, payroll, and benefits management.<br> We partner with some of the world’s most innovative companies, including Fortune 500 businesses and leading startups.<br> We are a small but strong team of 250+ people (and growing) hyper-focused on delivering a world-class platform and unparalleled service with our industry-leading partnerships.<br> As a Senior AI Engineer, you will build production-grade conversational AI systems and has a strong foundation in modern AI technologies and hands-on experience designing, evaluating, testing, and deploying AI applications at scale.<br> Responsibilities Design, develop, and maintain production-grade conversational AI systems.<br> Own AI features from technical design through deployment and production support.<br> Design scalable AI architectures and agent workflows.<br> Build and maintain AI evaluation frameworks, benchmarks, and automated testing pipelines.<br> Continuously improve AI quality through experimentation, evaluation, and data-driven optimization.<br> Integrate multiple AI providers and select the best models for different use cases.<br> Monitor production AI systems and proactively improve reliability, quality, and performance.<br> Collaborate with product, frontend, and backend teams to deliver end-to-end AI features.<br> Review technical designs and contribute to engineering best practices.<br> Troubleshoot complex AI and production issues while ensuring high-quality, maintainable solutions.<br> Stay up to date with the latest advancements in Generative AI and apply them where they create business value.<br> Startup environment: RemoFirst is an early-stage startup.<br> You have a voice that can influence, and grow rapidly.<br> An opportunity to build a tech unicorn.<br> Growth opportunity: This is a chance to join an AI-forward company driving innovation through artificial intelligence.<br> As Product Designer, you’ll lead product initiatives that deliver strategic impact.<br> Direct impact: Your work will be at the center of how we grow revenue, support customers, and differentiate in the market.<br> Autonomy and Accountability: We value autonomy and accountability — there’s no bureaucracy or lengthy approval process.<br> We prioritize speed and results to keep moving forward effectively.<br> Work for a Market Leader: Scale a project that counts market-leading companies like Microsoft, Mastercard, and more as happy customers.<br> Leadership visibility: Reporting into the Lead AI Engineer which means your projects will be strategic and business-critical.<br> Compensation and perks are great: Competitive compensation.<br> 100% remote work.<br> Culture: You will get to work with some of the best colleagues coming from top tech companies.<br> We lead with respect, kindness, and the right to fail.<br> We value hard yet smart work.<br> Diversity and inclusion are part of our DNA.<br> As we grow and evolve, we welcome your input to help us define our culture further.<br> 5+ years of experience building AI-powered applications in production.<br> Strong knowledge of Large Language Models (LLMs), prompt engineering, AI agents, RAG, tool calling, structured outputs, and orchestration frameworks.<br> Proven experience designing and developing conversational AI systems (voice and/or chat applications).<br> Strong understanding of AI system design, including context management, memory, retrieval, multi-agent workflows, and reasoning pipelines.<br> Experience building AI evaluation frameworks, automated testing pipelines, benchmarking, and regression testing.<br> Demonstrated experience improving AI quality through iterative evaluation and experimentation.<br> Strong software engineering fundamentals, including clean architecture, design patterns, testing, and maintainable code.<br> Experience integrating multiple AI providers such as OpenAI, Anthropic, Gemini, or similar.<br> Experience deploying, monitoring, and maintaining AI applications in production environments.<br> Full-stack development experience with modern backend and frontend technologies.<br> Experience with cloud platforms, APIs, CI/CD pipelines, and production deployments.<br> Strong analytical and problem-solving skills.<br> Ability to evaluate multiple AI approaches and select the most effective solution based on quality, reliability, latency, and cost.<br> Ability to independently own complex AI projects from design through production with minimal supervision.<br> Nice to Have Experience building traditional ML applications.<br> Experience with AI observability, tracing, and monitoring.<br> Experience mentoring engineers and driving engineering best practices.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mindrift is looking for a highly skilled Presentation Designer to join the Tendem project (**https://tendem.<br>ai/**) and create high-quality presentations for real-world use cases.<br> In this role, you'll apply your expertise in visual communication, information design, and storytelling to create clear, engaging, and professionally designed presentations.<br> This part-time remote opportunity is ideal for creative professionals with hands-on experience in visual communications, information design, and storytelling.<br> What We Do The Mindrift platform connects specialists with innovative technology projects.<br> Our mission is to help develop high-quality AI technologies by combining real-world expertise from professionals across the globe with advanced AI development efforts.<br> About the Role This is a freelance role for a Tendem project.<br> As a Presentation Designer, you will focus on storytelling and visual hierarchy.<br> We need a specialist who knows how to communicate complex information beautifully, turning raw data and narratives into compelling, highly persuasive slides and one-pagers.<br> You will use tools such as PowerPoint, Keynote, Adobe Creative Suite, and Figma to create polished, presentation-ready deliverables.<br> Key Responsibilities Design high-stakes pitch decks and professional one-pagers tailored for specific audiences.<br> Translate complex data into clear visual storytelling with a strong focus on minimalism and precise information hierarchy.<br> Elevate presentations using custom fonts, elegant animations, and perfect visual consistency.<br> Enforce a polished, persuasive, and premium corporate-meets-creative style across all deliverables.<br> Execute formatting quality standards through meticulous validation of visual alignment, pacing, and brand adherence before final delivery.<br> How to get started Apply, pass qualification(s), and start contributing to projects aligned with your expertise — on your own schedule.<br> Educational qualifications At least 2 years of relevant experience in graphic design, presentation design, visual storytelling, or data visualization is desirable.<br> Bachelor’s or Master’s Degree in Graphic Design, Fine Arts, Visual Communications, or related creative fields is a plus.<br> Academic and/or Professional Experience Candidates must have a strong portfolio featuring high-end presentations, pitch decks, and data visualization (not just basic templates).<br> We are looking for specialists who have a deep understanding of pacing, storytelling, and information design.<br> A methodical, detail-oriented approach and the ability to work independently to transform complex narratives into premium visuals are essential.<br> Technical Skills (Essential) Presentation software: Expertise in PowerPoint, Keynote, etc.<br>, for building complex, dynamic, and perfectly animated decks.<br> Design tools: Deep proficiency with Adobe Creative Suite (Illustrator, Photoshop) or Figma to create custom graphics and layouts.<br> Data &amp; information design: Ability to translate complex data and multi-level hierarchical structures into clear, minimalist visual storytelling.<br> Typography &amp; animation: Advanced skills in working with custom fonts and smooth, elegant animations for premium deliverables.<br> Additional requirements Hands-on experience creating high-end, premium corporate-meets-creative style layouts.<br> Strong attention to detail and absolute commitment to visual perfectness.<br> Self-directed work ethic with the ability to troubleshoot design challenges independently.<br> English proficiency: Upper-intermediate (B2) or above (required) Your CV must include a link to your portfolio featuring high-end presentations, pitch decks, and data visualization.<br> Applications without a portfolio link, or without relevant presentation cases, will not be considered.<br> Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $35 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<p>Realize a 3D subset from an existing model. Create 3D parts and sub-assemblies according to the CDC and the provided model. Establish the nomenclature of the drawn sub-assemblies. Contribute to the realization of the compliance matrix, functional analysis, etc. Prepare the supporting documents for the design (DJD, dimension chains, verification grid). Prepare assembly drawings / exploded views, detail drawings, and footprint drawings. Participate in the company's continuous improvement process.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Creative</li><li>Customer oriented</li><li>Good negotiation skills</li><li>Good communication skills</li><li>Active listening skills</li><li>Reactive</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mindrift is looking for a highly skilled Presentation Designer to join the Tendem project (**https://tendem.<br>ai/**) and create high-quality presentations for real-world use cases.<br> In this role, you'll apply your expertise in visual communication, information design, and storytelling to create clear, engaging, and professionally designed presentations.<br> This part-time remote opportunity is ideal for creative professionals with hands-on experience in visual communications, information design, and storytelling.<br> What We Do The Mindrift platform connects specialists with innovative technology projects.<br> Our mission is to help develop high-quality AI technologies by combining real-world expertise from professionals across the globe with advanced AI development efforts.<br> About the Role This is a freelance role for a Tendem project.<br> As a Presentation Designer, you will focus on storytelling and visual hierarchy.<br> We need a specialist who knows how to communicate complex information beautifully, turning raw data and narratives into compelling, highly persuasive slides and one-pagers.<br> You will use tools such as PowerPoint, Keynote, Adobe Creative Suite, and Figma to create polished, presentation-ready deliverables.<br> Key Responsibilities Design high-stakes pitch decks and professional one-pagers tailored for specific audiences.<br> Translate complex data into clear visual storytelling with a strong focus on minimalism and precise information hierarchy.<br> Elevate presentations using custom fonts, elegant animations, and perfect visual consistency.<br> Enforce a polished, persuasive, and premium corporate-meets-creative style across all deliverables.<br> Execute formatting quality standards through meticulous validation of visual alignment, pacing, and brand adherence before final delivery.<br> How to get started Apply, pass qualification(s), and start contributing to projects aligned with your expertise — on your own schedule.<br> Educational qualifications At least 2 years of relevant experience in graphic design, presentation design, visual storytelling, or data visualization is desirable.<br> Bachelor’s or Master’s Degree in Graphic Design, Fine Arts, Visual Communications, or related creative fields is a plus.<br> Academic and/or Professional Experience Candidates must have a strong portfolio featuring high-end presentations, pitch decks, and data visualization (not just basic templates).<br> We are looking for specialists who have a deep understanding of pacing, storytelling, and information design.<br> A methodical, detail-oriented approach and the ability to work independently to transform complex narratives into premium visuals are essential.<br> Technical Skills (Essential) Presentation software: Expertise in PowerPoint, Keynote, etc.<br>, for building complex, dynamic, and perfectly animated decks.<br> Design tools: Deep proficiency with Adobe Creative Suite (Illustrator, Photoshop) or Figma to create custom graphics and layouts.<br> Data &amp; information design: Ability to translate complex data and multi-level hierarchical structures into clear, minimalist visual storytelling.<br> Typography &amp; animation: Advanced skills in working with custom fonts and smooth, elegant animations for premium deliverables.<br> Additional requirements Hands-on experience creating high-end, premium corporate-meets-creative style layouts.<br> Strong attention to detail and absolute commitment to visual perfectness.<br> Self-directed work ethic with the ability to troubleshoot design challenges independently.<br> English proficiency: Upper-intermediate (B2) or above (required) Your CV must include a link to your portfolio featuring high-end presentations, pitch decks, and data visualization.<br> Applications without a portfolio link, or without relevant presentation cases, will not be considered.<br> Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $35 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mindrift is looking for a highly skilled Presentation Designer to join the Tendem project (**https://tendem.<br>ai/**) and create high-quality presentations for real-world use cases.<br> In this role, you'll apply your expertise in visual communication, information design, and storytelling to create clear, engaging, and professionally designed presentations.<br> This part-time remote opportunity is ideal for creative professionals with hands-on experience in visual communications, information design, and storytelling.<br> What We Do The Mindrift platform connects specialists with innovative technology projects.<br> Our mission is to help develop high-quality AI technologies by combining real-world expertise from professionals across the globe with advanced AI development efforts.<br> About the Role This is a freelance role for a Tendem project.<br> As a Presentation Designer, you will focus on storytelling and visual hierarchy.<br> We need a specialist who knows how to communicate complex information beautifully, turning raw data and narratives into compelling, highly persuasive slides and one-pagers.<br> You will use tools such as PowerPoint, Keynote, Adobe Creative Suite, and Figma to create polished, presentation-ready deliverables.<br> Key Responsibilities Design high-stakes pitch decks and professional one-pagers tailored for specific audiences.<br> Translate complex data into clear visual storytelling with a strong focus on minimalism and precise information hierarchy.<br> Elevate presentations using custom fonts, elegant animations, and perfect visual consistency.<br> Enforce a polished, persuasive, and premium corporate-meets-creative style across all deliverables.<br> Execute formatting quality standards through meticulous validation of visual alignment, pacing, and brand adherence before final delivery.<br> How to get started Apply, pass qualification(s), and start contributing to projects aligned with your expertise — on your own schedule.<br> Educational qualifications At least 2 years of relevant experience in graphic design, presentation design, visual storytelling, or data visualization is desirable.<br> Bachelor’s or Master’s Degree in Graphic Design, Fine Arts, Visual Communications, or related creative fields is a plus.<br> Academic and/or Professional Experience Candidates must have a strong portfolio featuring high-end presentations, pitch decks, and data visualization (not just basic templates).<br> We are looking for specialists who have a deep understanding of pacing, storytelling, and information design.<br> A methodical, detail-oriented approach and the ability to work independently to transform complex narratives into premium visuals are essential.<br> Technical Skills (Essential) Presentation software: Expertise in PowerPoint, Keynote, etc.<br>, for building complex, dynamic, and perfectly animated decks.<br> Design tools: Deep proficiency with Adobe Creative Suite (Illustrator, Photoshop) or Figma to create custom graphics and layouts.<br> Data &amp; information design: Ability to translate complex data and multi-level hierarchical structures into clear, minimalist visual storytelling.<br> Typography &amp; animation: Advanced skills in working with custom fonts and smooth, elegant animations for premium deliverables.<br> Additional requirements Hands-on experience creating high-end, premium corporate-meets-creative style layouts.<br> Strong attention to detail and absolute commitment to visual perfectness.<br> Self-directed work ethic with the ability to troubleshoot design challenges independently.<br> English proficiency: Upper-intermediate (B2) or above (required) Your CV must include a link to your portfolio featuring high-end presentations, pitch decks, and data visualization.<br> Applications without a portfolio link, or without relevant presentation cases, will not be considered.<br> Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $35 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<p>As a Design Advisor on our specialized team, you will partner with customers to transform their ideas into impactful visual solutions. Whether creating custom designs from scratch, developing original creative concepts, or enhancing existing artwork and Vista templates, you'll combine creativity, design expertise, and customer collaboration to deliver exceptional results tailored to each customer's goals. This is a highly collaborative, customer-facing design role. You will lead scheduled design consultations with customers over video calls, and phone, using screen sharing to present your work, explain your creative decisions, gather feedback in real time, and collaboratively bring ideas to life. You will create custom designs from scratch, resolve sophisticated design requests, and support other design teams through both written and verbal communication. Success in this role requires confidence in communicating with customers, presenting creative concepts, and guiding them through design decisions while delivering an outstanding customer experience. You'll provide a high-quality customer experience across multiple channels, including video consultations, conference calls, phone, email, while consistently meeting our service standards and internal documentation. In addition, you will collaborate with colleagues across our global teams to support different markets whenever needed.</p><p>What You Will Do</p><p>As a Design Advisor at Vista, you'll do more than create great designs; you'll partner directly with customers to bring their vision to life. This role uniquely combines creative expertise with customer consultation, requiring excellent communication, presentation, and relationship-building skills. Success in this role requires you to feel comfortable leading customer conversations in English, presenting your work during live video consultations, explaining your creative decisions, responding to feedback in real time, and confidently guiding customers toward the best design solutions.</p><p>Here's how you'll make an impact:</p><ul><li>Lead Live Design Consultations: Facilitate scheduled video consultations and conference calls with customers, confidently presenting your work through screen sharing, explaining your design choices, gathering live feedback, and collaborating to achieve the best possible outcome.</li><li>Transform Ideas into Design: Create high-quality, customer-focused visual solutions tailored to each brand's unique identity and business goals, translating customer ideas into impactful creative work.</li><li>Act as a Creative Advisor: Build trust with customers by understanding their goals, recommending design solutions, and guiding them through creative decisions with professionalism and confidence.</li><li>Present &amp; Influence: Clearly communicate design rationale, present concepts in an engaging and structured way, recommend layout improvements, and educate customers on design best practices and Vista's product solutions.</li><li>Solve Creative Challenges: Interpret customer briefs, research business needs, and deliver polished designs that balance creativity, usability, and commercial objectives while adapting quickly to customer feedback during live sessions.</li><li>Deliver an Exceptional Customer Experience: Create positive, engaging interactions across video calls, conference calls, phone, email, chat, messaging, and support tickets, ensuring every customer feels heard, supported, and confident throughout their design journey.</li><li>Collaborate Globally: Partner with a diverse global community of designers to share knowledge, participate in design reviews, provide constructive feedback, and support colleagues across multiple markets.</li><li>Embrace Emerging Tools: Continuously expand your expertise in Vista's products, design technologies, and AI-powered creative workflows to deliver innovative solutions and continuously improve the customer experience.</li></ul><p>What Success Looks Like</p><p>You'll thrive in this role if you:</p><ul><li>Enjoy interacting directly with customers and building strong relationships.</li><li>Are confident in leading video calls, conference calls, and screen-sharing sessions in English.</li><li>Can present and explain your creative decisions clearly and professionally.</li><li>Feel comfortable receiving and incorporating live customer feedback into your designs.</li><li>Balance creativity with customer needs and business objectives.</li><li>Deliver outstanding design quality while providing an exceptional customer experience.</li><li>Enjoy collaborating with teammates across global markets and learning from diverse perspectives.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Graphic Design Education: A degree, diploma, or formal education in Graphic Design, Visual Communication, Fine Arts, or a related creative field. Equivalent professional experience combined with an outstanding portfolio demonstrating strong design fundamentals may also be considered.</li><li>Design Experience: At least 1 year of professional graphic design experience, with a strong portfolio showcasing expertise in design fundamentals, typography, layout, composition, branding, and visual storytelling.</li><li>Technical Proficiency: Hands-on mastery of Adobe Creative Suite (Illustrator, Photoshop, InDesign) and confidence using modern design tools and workflows.</li><li>Creative Problem-Solving Skills: Ability to analyze customer briefs, understand business objectives, interpret feedback, and translate ideas into effective creative design solutions.</li><li>Customer-Facing Experience: Experience in a customer-facing role, with a proven ability to build rapport, communicate clearly in English (written and spoken), present ideas confidently, and guide customers through creative decisions.</li><li>Presentation &amp; Collaboration Skills: Comfortable presenting design concepts through video calls and screen sharing, explaining creative choices, receiving feedback, and collaborating with customers and global teams.</li><li>Schedule Flexibility: Adaptability to support different schedules and markets as business needs evolve.</li><li>Nice to Have: Either one year of graphic design proven experience or inexperienced but with a good portfolio. Fluency in one additional language alongside English is highly preferred. This may include French, Italian, Spanish, German, Portuguese, or any other language that enables support for our global customer base. Familiarity with AI-powered creative tools (e.g., Gemini, Nano Banana, or similar) to generate design inspiration, validate that customer requests have been accurately interpreted, and enhance overall design quality while maintaining human creativity and judgment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br>What this opportunity involves: We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br> You'll create challenging tasks and evaluation criteria within realistic simulated environments: Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate What we look for: 8+ years in software development Core stack: Python (FastAPI), JavaScript/TypeScript (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+ Why this is hard: Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution.<br> Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paidEffort estimate Tasks for this project are estimated to take 30 hours to complete, depending on complexity.<br> This is an estimate and not a schedule requirement; you choose when and how to work.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation: Up to $150/hr equivalent , depending on level and pace.<br> Tasks are estimated at ~30 hours each; you set your own schedule.<br></span> </div>

<p>Elaborer et proposer des solutions techniques compl tes et robustes selon un Cahier des Charges. Faires des choix technologiques justifi s adapt s au contexte industriel et aux exigences du produit (mat riaux, proc d ). Assurer la r alisation de ses travaux selon les processus en vigueur (revue 2D, revue 3D, ...). Elaborer les documents justificatifs de ses livrables selon les processus en vigueur. Prendre en consid ration les contraintes "design to cost", "design to manufacturing" et ergonomie dans ses conceptions. Animer et Participer activement aux AMDEC Produits et Process. Assurer et communiquer l' tat des travaux dont il est en charge et alerter en cas de d rive. Veiller l'atteinte de ses objectifs et signaler toute d rive. Etre garant du respect des objectifs qualit , co t et d lais de ses livrables. Assurer la bonne int gration des dossier de d finition sur le PLM. Apporter une assistance technique si besoin et partager ses connaissances avec l'ensemble de l' quipe. Contribuer dans l'am lioration des modules de formation li s son m tier et la transmission du savoir au sein du BE travers la capitalisation et la participation au d veloppement de l' cole de formation. Conna tre et respecter les normes et proc dures internes applicables son domaine d'activit . Assurer une veille technologique et normative. Participer la d marche d'am lioration continue de l'Entreprise.</p><p><strong>Desired Candidate Profile</strong></p><p>Agilit Organisation et planification Gestion des priorit s Ma trise des m thodes de r solution de probl me (8D, QRAP, QRQC...) Autonomie et prise d'initiatives Communication R silience Prise de d cision</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Ensure the successful development of plastic parts for the project. Analyze work requests (parts, mechanical environment, vehicle technical constraints, etc.) and identify potential challenges (problems, inconsistencies, major difficulties). Have an excellent command of plastic injection molding and its constraints. Design 3D models using Catia V5 or Siemens NX , with strong expertise in Part Design and Generative Shape Design , considering: Styling surfaces (design and functional parts). The variation of injected parts within their mechanical environment (defining fixed points and reference systems). Thickness optimization and technical integration of parts into their mechanical environment. Surface stitching, surface updates, and technical edge refinements to prevent shrinkage. Demoldability rules, including integrating slide movements into the mold, especially for complex parts (a plus). Positioning, securing, and assembling techniques for plastic parts. Mastery of joining and fitting techniques (butt joint, overlap, step joints, etc.). Proximity analysis and potential clash detection between parts. Knowledge and mastery of PLM tools would be an asset. Oversee part and/or system development up to 2D drawing production ( Catia V5 Drawing ), ensuring functional dimensioning for internal and supplier requirements. Collaborate closely with suppliers of injected plastic parts for mold development.</p></div></section>

<p><font dir="auto" ><font dir="auto" >Design, validate, and develop manufacturing and inspection documentation (routings, instruction sheets, bills of materials, allocations). Manage process modifications and ensure technical and documentary compliance. Analyze performance gaps and propose corrective and preventive action plans. Participate in risk analyses (FMEA, MFT, etc.) and the implementation of new processes. Contribute to the qualification and requalification of special processes. Ensure the industrialization/production handover and maintain operational readiness. Lead or co-lead Lean projects (VSM, 5S, SMED, line setup, visual management, etc.). Identify and prioritize areas for improvement on production lines. Contribute to a culture of continuous improvement and support technicians in implementing actions. Monitor performance indicators (OEE, scrap, non-quality, cycle time). Define production resource requirements (machines, jigs, tooling, etc.) and validate their technical conformity. Manage their commissioning, validation, and obsolescence. Coordinate technical training for operators and technicians on their use. Participate in the design or adaptation of workstations (ergonomics, safety, workflow).</font></font></p><p><strong>Desired Candidate Profile</strong></p><ul><li><font dir="auto" ><font dir="auto" >Analytical, synthesis and structuring skills</font></font></li><li><font dir="auto" ><font dir="auto" >Interpersonal communication</font></font></li><li><font dir="auto" ><font dir="auto" >Cross-functional project management (steering)</font></font></li><li><font dir="auto" ><font dir="auto" >Results orientation</font></font></li><li><font dir="auto" ><font dir="auto" >Group animation</font></font></li></ul>

<p><font dir="auto" ><font dir="auto" >Design, validate, and develop manufacturing and inspection documentation (routings, instruction sheets, bills of materials, allocations). Manage process modifications and ensure technical and documentary compliance. Analyze performance gaps and propose corrective and preventive action plans. Participate in risk analyses (FMEA, MFT, etc.) and the implementation of new processes. Contribute to the qualification and requalification of special processes. Ensure the industrialization/production handover and maintain operational readiness. Lead or co-lead Lean projects (VSM, 5S, SMED, line setup, visual management, etc.). Identify and prioritize areas for improvement on production lines. Contribute to a culture of continuous improvement and support technicians in implementing actions. Monitor performance indicators (OEE, scrap, non-quality, cycle time). Define production resource requirements (machines, jigs, tooling, etc.) and validate their technical conformity. Manage their commissioning, validation, and obsolescence. Coordinate technical training for operators and technicians on their use. Participate in the design or adaptation of workstations (ergonomics, safety, workflow).</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" ><font dir="auto" >Analytical, synthesis, and structuring skills; interpersonal communication; cross-functional project management; results orientation; group facilitation</font></font></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>As a Colgate-Palmolive Packaging Engineer you will be supporting the North America pillar of Oral Care. You will be responsible for the development and implementation of innovative packaging solutions, working collaboratively with the Global and Marketing Divisions, Supply Chain, and Procurement teams. You will also have broad responsibilities in supporting our Manufacturing Operations to drive quality improvements, production efficiencies and cost savings projects. Additionally, you will play a critical role for the technical transfer of projects from Packaging to Operations.</span></p><br> <p><strong><span>Your Day to Day and the Future</span></strong></p><br> <ul> <li> <p><span>Partner closely with North America (NA) Marketing and Design to bring innovative new products and packaging to the market, meeting brand and business requirements</span></p><br> </li> <li> <p><span>Coordinate and execute line trials to ensure package performance across all manufacturing sites, including on-site attendance of component and manufacturing startups (as needed)</span></p><br> </li> <li> <p><span>Analyze packaging quality issues, develop root-cause solutions, and drive the implementation of corrective and preventative actions</span></p><br> </li> <li> <p><span>Conduct vendor qualifications for new packaging materials, ensuring proper validation and manufacturing efficiency</span></p><br> </li> <li> <p><span>Manage the shipment of packaging component samples to cross-functional partners</span></p><br> </li> <li> <p><span>Develop packaging designs for new product launches. You will ensure that all solutions meet the CP requirements for Quality, Sustainability, brand equity, consumer experience, and manufacturing execution</span></p><br> </li> <li> <p><span>Responsible for Technology Transfer from Package Engineering to Manufacturing Operations to ensure new packaging systems perform as designed and meet operational targets</span></p><br> </li> <li> <p><span>Create cost and savings estimates, tooling and package qualification plans, technology transfer documentation (Design History Files) and final package component specifications</span></p><br> </li> <li> <p><span>Create component codes, Bills of Materials (BOMs), Manufacturing Specifications, and develop specific case/cube information</span></p><br> </li> <li> <p><span>Responsible for meeting timeline commitments, including project planning steps, supplier selection, capital expenditure estimates, and technology transfer associated with projects. Manage flow of packaging related information, and communicate project progress, actual costs, and any associated risks</span></p><br> </li> <li> <p><span>Interface with the Innovation teams to identify new and innovative packaging solutions, and work with other cross-functional teams to bring them to life through meticulous planning, design execution, and rigorous testing</span></p><br> </li> <li> <p><span>Help identify or execute cost saving opportunities in your area of responsibility, and work towards implementation together with multiple cross-functional collaborators</span></p><br> </li> </ul> <p><strong><span>You'll need to have:</span></strong></p><br> <ul> <li> <p><span>Bachelor's Degree in Package Engineering/Technology/Science or related field</span></p><br> </li> <li> <p><span>3+ years Package Development or similar Engineering experience&nbsp;</span></p><br> </li> <li> <p><span>Fundamental understanding of printing and decoration techniques for plastics, labels, or paperboard materials</span></p><br> </li> <li> <p><span>Knowledge of laminate tubes, PET bottles, paperboard folding cartons, or corrugated shippers</span></p><br> </li> </ul> <p><strong><span>Even better if you have:</span></strong></p><br> <ul> <li> <p><span>Experience working in a complex manufacturing or plant environment, with the ability to operate as a self-starter and communicate effectively with senior leaders and remote team members</span></p><br> </li> <li> <p><span>Product design and development experience in the CPG field</span></p><br> </li> <li> <p><span>Understanding of extrusion blow molding, injection molding, paperboard and corrugated packaging designs.&nbsp;</span></p><br> </li> <li> <p><span>Product testing, data collection, data analysis and assessing pass / fail criteria to determine final product approval</span></p><br> </li> <li> <p><span>Knowledge of packaging materials and conversion processes, such as extrusion blow molding, injection molding, and exposure to final product filling and assembly</span></p><br> </li> <li> <p><span>Experience using Google Suite applications, SAP or other ERP software and/or similar computer systems.</span></p><br> </li> <li> <p><span>Experience with CapePack or Tops software for case/cube development</span></p><br> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Role Overview<br> We are expanding our operations in the Democratic Republic of Congo and looking for an exceptional mechanical engineer to join our site team.</p><br><p>If you are a hands-on mechanical expert who thrives in heavy industrial environments and excels at maximizing equipment uptime, diagnosing complex mechanical failures, and optimizing machinery performance, this role is for you! You will be the technical backbone, ensuring our heavy assets operate safely, efficiently, and reliably.</p><br><p>Key Responsibilities<br> Equipment Reliability &amp; Maintenance: Develop and execute comprehensive preventive and predictive maintenance programs for heavy machinery and industrial equipment to maximize operational uptime.</p><br><p>Root-Cause Failure Analysis: Lead investigations into mechanical breakdowns, component failures, and system anomalies. Design and implement permanent engineering solutions to prevent recurrence.</p><br><p>Technical Oversight &amp; Spare Parts Specifications: Define technical specifications for critical spare parts, review material quality, and collaborate with procurement to ensure replacement components meet rigorous engineering standards.</p><br><p>Installation &amp; Commissioning: Oversee the installation, alignment, testing, and commissioning of new mechanical systems, hydraulic/pneumatic circuits, and heavy plant equipment.</p><br><p>Workshop &amp; Team Leadership: Guide on-site technicians and mechanical teams during complex repairs, ensuring strict adherence to safety protocols, quality standards, and standard operating procedures (SOPs).</p><br><br>Qualifications<br><p>Role Requirements &amp; Qualifications<br> Education: Bachelor’s degree in mechanical engineering or a closely related technical engineering discipline.</p><br><p>Language: Proficiency in French (spoken and written) for effective on-site communication and technical oversight.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><strong>Are you ready</strong> to take full ownership of high impact engineering initiatives and shape the future of high-speed manufacturing? As a Project Engineer, you will be the driving force behind the design, execution, and commissioning of multi million dollar capital projects across our state of the art Oral Care product production facility. Seated within the Making division of our world renowned toothpastes and mouthwash rinses, you will be the Engineer conceptualizing the future of our manufacturing capabilities.&nbsp;</p><br> <p>From blank page concept and vendor bidding to line installation, automation integration, and final qualification, you will partner with cross-functional plant leadership and external contractors to transform capital expenditure into operational excellence.</p><br> <p><strong>Your Day to Day and The Future</strong></p><br> <ul> <li> <p>Direct capital projects from initial scope definition and technical feasibility studies through construction, startup, and operational handover.</p><br> </li> <li> <p>Own the Capital Expenditure Budget (CEB) process administer contractor contracts, monitor expenditures, and maintain strict cost control to deliver projects on time and under budget.</p><br> </li> <li> <p>Develop detailed project execution plans, sequence critical path milestones, and resolve operational bottlenecks on the factory floor.</p><br> </li> <li> <p>Study product specifications and performance targets to design technical solutions, specify high-speed processing/packaging machinery, and execute layout studies.</p><br> </li> <li> <p>Lead rigorous testing protocols to confirm equipment reliability, product performance, and full compliance with FDA/cGMP and quality standards.</p><br> </li> <li> <p>Partner with Controls, Reliability, and Safety teams to integrate advanced utility systems, line automation, and digital manufacturing tools into plant workflows.</p><br> </li> <li> <p>Manage RFP/RFQ bidding processes, evaluate technical vendor proposals, and supervise external contractors on-site to enforce strict performance and safety standards.</p><br> </li> <li> <p>Champion Environmental, Occupational Health, and Safety (EOHS) rules across all project sites, keeping every build compliant with OSHA and internal zero-incident safety standards.</p><br> </li> <li> <p>Track and report real-time project metrics, capital spending trends, and risk management plans to executive plant leadership.</p><br> </li> </ul> <p><strong>You'll need to have:</strong>&nbsp;</p><br> <ul> <li> <p>Bachelor of Science in Mechanical, Industrial, or Electrical Engineering (or related engineering discipline).</p><br> </li> <li> <p>4+ years of hands-on engineering experience inside a high-speed cGMP manufacturing environment (CPG, Pharma, Food &amp; Beverage, Personal Care, or related industry)</p><br> </li> <li> <p>Proven track record of managing capital equipment installations, line upgrades, and factory modifications from initial concept through startup</p><br> </li> <li> <p>Practical working knowledge of cGMP standards, validation protocols including Design Qualification, Installation Qualification, Operational Qualification, Performance Qualification, and EOHS/OSHA safety regulations</p><br> </li> <li> <p>Proficiency in CAD software such as AutoCAD or related products</p><br> </li> </ul> <p><strong>Even better if you have:</strong></p><br> <ul> <li> <p>A Master's degree</p><br> </li> <li> <p>Experience with capital budget tracking software such as SAP</p><br> </li> <li> <p>Active Project Management Professional certification</p><br> </li> <li> <p>Hands-on experience with high-speed automated packaging, hygienic design, or liquid processing systems</p><br> </li> <li> <p>Experience managing external engineering firms and construction contractors on active production floors</p><br> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Venari Security is looking for a senior platform-minded integration engineer, architect, or independent consultant who can take ownership of complex integration capabilities from specification through design, build, validation, and delivery.</p><br> <p>This is not a narrow coding assignment. You will define and deliver production-grade integrations that connect Venari’s Adaptive Cryptographic Intelligence Platform with leading cloud providers, cybersecurity platforms, enterprise systems, and SaaS solutions. The ideal candidate can understand an existing platform architecture, identify the right extension points, specify the subsystem to be built, and deliver it autonomously with the right security, reliability, and operational foundations.</p><br> <p>You will work at the intersection of platform engineering, cloud architecture, API design, and integration security, helping Venari build a scalable integration layer for AWS, Azure, major cybersecurity ecosystems, and high-value SaaS environments.</p><br> <p><span>Mission and Scope of Work</span></p><br> <ul> <li>Own the end-to-end delivery of integration subsystems: clarify requirements, write technical specifications, design the architecture, build the services, validate behavior, and prepare production release.</li> <li>Design scalable integration patterns for major cloud providers, especially AWS and Azure, including secure access, discovery, data ingestion, event handling, and operational monitoring.</li> <li>Build robust APIs, connectors, webhooks, and integration services for cloud platforms, cybersecurity tools, CMDBs, SIEMs, vulnerability management platforms, identity providers, and enterprise SaaS solutions.</li> <li>Implement secure authentication, authorization, and secret-management flows using standards such as OAuth2, OpenID Connect, SSO, RBAC, API keys, signed requests, and cloud-native identity mechanisms.</li> <li>Understand Venari’s platform architecture and build on top of it without creating isolated, hard-to-maintain components.</li> <li>Deliver integration configuration workflows and UI components that make setup, testing, monitoring, and troubleshooting simple for users.</li> <li>Build for production from the start: observability, retries, rate-limit handling, caching, error handling, auditability, automated tests, documentation, and deployment readiness.</li> </ul> <p><span>What You Will Deliver</span></p><br> <ul> <li>Clear technical specifications for each integration subsystem, including architecture, data flows, security model, edge cases, and delivery plan.</li> <li>Production-ready backend services, APIs, connectors, and integration components aligned with Venari’s platform architecture.</li> <li>Secure cloud and SaaS integration capabilities for AWS, Azure, and selected enterprise platforms.</li> <li>Authentication and authorization modules covering OAuth2, OpenID Connect, SSO, RBAC, token lifecycle, and secure credential handling.</li> <li>Configuration screens, validation workflows, and operational views that allow users to configure, test, and monitor integrations.</li> <li>Automated tests, CI/CD readiness, logging, metrics, deployment notes, and technical documentation that allow the core team to maintain and extend the work.</li> </ul> <p><span>What We Are Looking For</span></p><br> <ul> <li>A senior engineer, architect, or technical consultant with more than 10 years of experience delivering enterprise software solutions at scale, with proven ability to specify, build, and deliver systems or subsystems autonomously, not only implement assigned tickets.</li> <li>Strong ability to understand an existing SaaS platform architecture, identify reusable platform capabilities, and build extensions that are coherent, maintainable, and scalable.</li> <li>Hands-on experience with cloud integrations on AWS and Azure, including IAM, service APIs, event services, networking constraints, credentials, permissions, and security boundaries.</li> <li>Strong API engineering background, including REST APIs, webhooks, asynchronous integration patterns, API gateways, rate limiting, pagination, retries, versioning, and backward compatibility.</li> <li>Deep understanding of integration security: OAuth2, OpenID Connect, SSO, RBAC, least privilege, token handling, secrets management, encryption in transit, audit logging, and secure error handling.</li> <li>Strong backend engineering experience, ideally with Spring Boot, microservices, containers, automated testing, and production-grade observability.</li> <li>Ability to communicate architecture decisions clearly, write practical technical documentation, and collaborate with product, frontend, backend, infrastructure, and security stakeholders.</li> </ul> <p><span>Experience That Will Stand Out</span></p><br> <ul> <li>Delivered integrations with AWS services, Azure services, identity providers, security tools, observability platforms, CMDBs, SIEMs, vulnerability management tools, or enterprise SaaS products.</li> <li>Built integration platforms, connector frameworks, developer-facing APIs, or extensibility layers used by multiple customers or product teams.</li> <li>Experience with event-driven architectures, queues, streaming, scheduling, sync engines, data pipelines, Kafka, CrateDB, PostgreSQL, or similar technologies.</li> <li>Hands-on experience with Docker, Kubernetes, Terraform, Helm, cloud-native deployment models, and CI/CD automation.</li> <li>Strong product sense: able to translate an integration use case into a reliable user workflow, not only a technical connector.</li> </ul> <p><span>Why This Is Interesting</span></p><br> <ul> <li>You will help shape the integration layer of a platform focused on cryptographic discovery, crypto agility, and the security challenges created by modern encrypted infrastructure.</li> <li>You will build integrations at scale with the platforms that matter most to enterprise customers: cloud providers, cybersecurity ecosystems, identity platforms, and SaaS solutions.</li> <li>You will have real ownership: define the right approach, make architecture decisions, deliver working subsystems, and leave behind a foundation the product team can extend.</li> <li>You will work on a technically meaningful problem where cloud security, API design, platform architecture, and product usability meet.</li> </ul> <p><span>Engagement Details</span></p><br> <ul> <li>Contract Type: Project-based (Independent Consultant / Contractor)</li> <li>Duration: Initial 3-month engagement, with extension subject to review of progress and delivery quality.</li> <li>Location: Hybrid</li> <li>Start Date: ASAP</li> </ul> <p><span>About Venari Security</span></p><br> <p>Venari Security provides organisations with advanced visibility into their encrypted attack surface, ensuring regulatory compliance and privacy adherence through our cryptographic discovery tool. Our focus is on crypto agility which helps you assess both external and internal cryptographic risks, preparing your business now and for the quantum future.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>RemoFirst empowers employers to be free from geographical boundaries when accessing talent, allowing employees to pursue opportunities wherever they may exist.<br> We are on a mission to be the FIRST to revolutionise the industry and be a truly generational company.<br> Our platform offers a full range of people management tools, employee benefits like health insurance, and financial benefits, enabling clients to hire anyone from anywhere with one click.<br> RemoFirst manages employees and contractors for Fortune 500 companies (e.<br>g., Microsoft, Mastercard) and the best startups worldwide (e.<br>g., TransferGo).<br> We are one of the fastest-growing private companies in the USA, recently at 85th position on the Inc.<br> 5000 list of fastest-growing companies in 2025.<br> Backed by $40+M in venture funding, we are scaling rapidly and investing heavily in AI-driven solutions to supercharge our operations.<br> We are looking for a Senior Data Engineer to design, build, and operate a scalable, cloud-native data platform that supports both analytics and AI-driven use cases.<br> This role goes beyond traditional data warehousing .<br>You will work closely with AI engineers to build the data foundation that powers LLM applications, agent-based systems and RAG solutions.<br> You will be responsible for building reliable data pipelines, developing curated data models and products, and ensuring high-quality, trusted data is readily available for analytics and AI workloads.<br> Key Responsibilities Design, build and maintain scalable data pipelines using modern data engineering tools (e.<br>g., dbt, Airflow, Prefect).<br> Develop and maintain dimensional and semantic data models to support analytics and operational use cases.<br> Build curated data products that support analytics and modern AI workloads.<br> Design data schemas and storage strategies optimized for both analytical and AI workloads.<br> Build and maintain version control workflows and isolated development/test environments.<br> Manage and optimize cloud-based data infrastructure ensuring performance, scalability, reliability and cost efficiency.<br> Contribute to the architecture and evolution of the organization's modern data platform.<br> Collaborate closely with AI, Analytics, and Product teams to deliver scalable, high-quality data solutions.<br> Startup environment: RemoFirst is an early-stage startup.<br> You have a voice that can influence, and grow rapidly.<br> An opportunity to build a tech unicorn.<br> Growth opportunity: This is a chance to join an AI-forward company driving innovation through artificial intelligence.<br> As Senior Product Owner, you’ll lead product initiatives that deliver strategic impact.<br> Direct impact: Your work will be at the center of how we grow revenue, support customers, and differentiate in the market.<br> Autonomy and Accountability: We value autonomy and accountability — there’s no bureaucracy or lengthy approval process.<br> We prioritize speed and results to keep moving forward effectively.<br> Work for a Market Leader: Scale a project that counts market-leading companies like Microsoft, Mastercard, and more as happy customers.<br> Leadership visibility: Reporting into the Data Lead which means your projects will be strategic and business-critical.<br> Compensation and perks are great: Competitive compensation and 100% remote work.<br> Culture: You will get to work with some of the best colleagues coming from top tech companies.<br> We lead with respect, kindness, and the right to fail.<br> We value hard yet smart work.<br> Diversity and inclusion are part of our DNA.<br> As we grow and evolve, we welcome your input to help us define our culture further.<br> 5+ years of hands-on experience in Data Engineering with proven delivery in production environments.<br> Strong expertise in building scalable data pipelines using Python and SQL.<br> Hands-on experience with modern data engineering tools such as dbt, Airflow, Prefect, or similar.<br> Strong experience with dimensional data modeling and semantic data models.<br> Experience working with cloud platforms (AWS preferred), including services such as S3, Redshift, Athena, Glue, and Lambda.<br> Hands-on experience designing, building and operating modern data infrastructure, including storage, compute, orchestration, and monitoring.<br> Familiarity with modern AI architectures and the data requirements for LLMs, AI agents and RAG applications.<br> What we are looking for Strong ownership mindset with the ability to thrive in a fast-paced startup environment.<br> Ability to translate evolving business, analytics and AI requirements into scalable data solutions.<br> Effective communicator who collaborates well across Data, AI, Product, and Engineering teams.<br> A senior engineer who balances architectural thinking with hands-on execution.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Our company manages one of the largest Elasticsearch clusters in France, powering a high-performance search engine applied to one of the most exhaustive global patent databases on the market. Within the "Data as a Service" (DaaS) team, we are the software and architectural core of this platform. We design data structures (mappings), develop massive ingestion pipelines, write custom plugins for Elasticsearch, and manage the query and caching backend. The DaaS team is responsible for application performance, index optimization, and result relevance. As part of our business development in Tunisia, we are looking for an Expert Elasticsearch and Backend Java Engineer to become a technical expert in our local team and collaborate closely with the teams in France.</p><p>Your Missions:</p><p>Reporting to the DaaS team, your responsibilities will cover the entire data lifecycle and Elasticsearch performance, from development to production investigation:</p><p>1. Elasticsearch Design &amp; Performance:</p><p>Design, optimize, and evolve data modeling (mappings, tokenizers, analyzers, data types) to ensure fast searches on millions of large documents.</p><p>Develop specific extensions and plugins in Java directly integrated with Elasticsearch to meet complex business needs for patent processing.</p><p>Actively participate in the preparation, testing, and validation of major and minor versions of the ES cluster.</p><p>2. Backend Development &amp; Pipelines (Java):</p><p>Develop and maintain the Elasticsearch query management backend and high-performance caching systems.</p><p>Design and optimize data loading programs (massive / batch data ingestion) and real-time index update flows.</p><p>3. Monitoring, Optimization &amp; Production Support:</p><p>Analyze cluster performance (Search &amp; Indexing throughput, latencies, JVM usage, Garbage Collection, Heap) for proactive optimization.</p><p>Be the technical point of contact for production incident investigations (in collaboration with the Systems team): slow queries, unstable nodes, etc.</p><p>Ensure capacity planning from an application perspective (sizing of shards, segments, nodes).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><b>Technical Skills (Hard Skills):</b></li><li><b>Elasticsearch Expertise:</b> You have a mastery of Elasticsearch's internal architecture (Lucene, sharding, segments, index lifecycle, advanced aggregations). You know how to profile and optimize complex queries (Query DSL). You are familiar with indexing and searching text-based documents.</li><li><b>Java Development:</b> Perfect mastery of Java (Core, Concurrency, Performance) for backend development, pipelines, and ideally ES plugins.</li><li><b>Performance &amp; Internals:</b> Excellent knowledge of the JVM (tuning, GC log analysis, thread dumps, heap dumps).</li><li><b>Python Development:</b> Knowledge of Python and data manipulation libraries (pandas).</li><li><b>Data &amp; CI/CD Ecosystem:</b> Good knowledge of build and containerization tools (Maven, Git, Docker).</li><li><b>Human and Relational Qualities (Soft Skills):</b></li><li><b>Autonomy and Rigor:</b> Ability to propose optimizations and carry subjects end-to-end in a context.</li><li><b>Analytical and Investigative Mindset:</b> You enjoy digging into logs and metrics to solve complex performance issues (troubleshooting problems).</li><li><b>Communication:</b> Excellent level of French (written and oral) for daily interaction with the team based in France.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Key ResponsibilitiesTechnical Presales Support Collaborate with sales teams to understand customer business and technical requirements in KSA and UAE Design and propose suitable technical solutions aligned with customer needs.<br> Prepare technical proposals, solution architectures, and statements of work.<br> Conduct product presentations, demonstrations, and proof-of-concept (POC) sessions.<br> Respond to RFPs, RFIs, and RFQs with technical and functional inputs.<br> Assist in effort estimation, BOM preparation, and solution sizing.<br> Customer Engagement Participate in customer meetings, workshops, and discovery sessions.<br> Explain technical concepts clearly to both technical and non-technical stakeholders.<br> Build trusted relationships with customers, partners, and internal teams.<br> Address customer technical concerns and provide recommendations.<br> Solution Design &amp; Documentation Prepare high-level and low-level solution designs when required.<br> Create architecture diagrams, implementation approaches, and integration workflows.<br> Ensure proposed solutions follow best practices, scalability, security, and compliance standards.<br> Collaboration Coordinate with engineering, delivery, product, and support teams.<br> Work closely with project managers and solution architects during transition to delivery.<br> Support continuous improvement of presales assets, templates, and demo environments.<br> Market &amp; Product Knowledge Stay updated on industry trends, competitor solutions, and emerging technologies.<br> Maintain strong understanding of company products, services, and capabilities.<br> Required Qualifications Bachelor’s degree in Computer Science, Information Technology, Engineering, or related field.<br> 3–6 years of experience in presales, solution engineering, systems engineering, or technical consulting.<br> Experience in preparing technical proposals and responding to RFPs.<br> Strong understanding of enterprise IT solutions, cloud technologies, integrations, and software architectures.<br> Excellent communication and presentation skills.<br> Ability to work in a fast-paced, customer-facing environment.<br> Preferred Skills Experience with cloud platforms such as Azure, AWS, or Google Cloud.<br> Knowledge of APIs, integrations, databases, and enterprise applications.<br> Familiarity with cybersecurity, infrastructure, data, or AI solutions is a plus.<br> Experience with diagramming and documentation tools (Visio, Draw.<br>io, etc.). Relevant technical certifications are advantageous.<br> Soft Skills Strong analytical and problem-solving abilities.<br> Customer-oriented mindset.<br> Strong teamwork and collaboration skills.<br> Ability to manage multiple opportunities simultaneously.<br> Good negotiation and stakeholder management skills.<br> KPIs / Success Metrics Quality and timeliness of technical proposals.<br> Win rate contribution.<br> Customer satisfaction during presales engagements.<br> Accuracy of solution sizing and estimations.<br> Number of successful demos and POCs delivered.<br></span> </div>