Sound Engineering Jobs in Tunisia

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Job Description<br><br><p><strong>Mission</strong></p><br><ul><li><strong>Key missions of the position: </strong></li><li>Responsible for driving &amp; executing process engineering KPIs for Panto, HVAC SFU (Small factory unit)</li><li>Responsible for Production Capacity Enhancement to meet the customer demand.</li><li>Establishment and prove out the process for New Products.</li><li>Collaborate with Production team on day-to-day basis to assess &amp; improve the existing processes.</li><li>Establishment of process for new products and process documents like process data sheet (PDS), operation data sheet (ODS), Assembly instructions sheet (AIS) etc.,</li><li>Facility creation for new projects and process improvements in existing Projects.</li><li>Collaborate with Production team on day-to-day basis to assess &amp; improve the existing processes.</li></ul><p><strong>Responsibilities</strong></p><br><ul><li>Continuous improvement /process establishment for the existing and new products in Panto &amp; HVAC line.</li><li>Productivity improvement /Cost savings in the respective SFU.</li><li>Derive Process for new Products and establish the same till Productionization and Handover.</li><li>Generation and maintenance of key documentation (PFD, PFMEA And WI) with the support&nbsp;of the CFT Team.</li><li>Establishment of new facility equipment’s and proving the process</li><li>Establishment of process for new products and make it’s corresponding documents like process data sheet (PDS), operation data sheet (ODS), Assembly instructions sheet (AIS) etc.,</li><li>Preparation of assembly cell layout and plant layout.</li><li>To respond the QRQC issues in SFU</li><li>Establish time standards for existing and new products.</li><li>Capacity Planning and drive Capacity Enhancement projects</li><li>Optimize process flow through layout.</li><li>Drive Ergonomics Improvement activities</li><li>Drive Performance measurement of the lines through OEE, Output / person</li><li>Monitor Oracle sanity and drive reduction of negative inventory due to MBOM error in SFU.</li><li>Coordinate for Customer, statutory audits and take necessary action on PED BBS points.</li><li>Capacity and capability analysis and inputs to Strap and SIOP</li><li>Budgetary Control for Capital Investment for project and existing products.</li><li>Preparing of Return on Investment (ROI) for each capital investments to make justification to Top&nbsp;&nbsp; management</li></ul><p>People Management: YES ¨&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; NO ¨</p><br><p>If People Management, how many employees are managed?</p><br><p>Number of people&nbsp;:</p><br><p>Budget Management:&nbsp; YES ¨ NO ¨</p><br><p><strong>Required Candidate Profile</strong></p><br><p><strong>Education/Training</strong></p><br><ul><li><em>What education and education level are necessary for the position?</em></li></ul><p>B.E – Mechanical Engg</p><br><p><strong>Professional</strong><strong> Experience</strong></p><br><ul><li>How many years of professional experience in a specific professional area are required for the position?</li></ul><p>Over all 5 to 6 years of experience in Production Engineering functions.</p><br><p><strong>Key Competences (Transversal/Professional)</strong></p><br><p><strong>Competence</strong></p><br><p><strong>Level</strong></p><br><p>Study &amp; Analysis High</p><br><p>Oral/ written communication High</p><br><p>Teamwork / Collaboration High</p><br><p>Leadership High</p><br><p><strong>Languages</strong></p><br><p>English, Tamil, Hindi (Preferable)</p><br><p><strong>Other Specifications</strong></p><br><p>Self-driven, Self-motivated, Dynamic, Interest to learn and explore new things, Analytical thinking.</p><br><br>Additional Information<br><br><p><strong>What could you accomplish in a place that puts People First?</strong></p><br><p>At Wabtec, it’s not just about a job - it’s about the impact you make. When our people come together, we’re Expanding the Possible by continuously improving what we do and how we do it - for our clients and each other.</p><br><p>If you’re ready to revolutionize how the world moves for future generations, Wabtec is the place for you.<br>&nbsp;</p><br><p><strong>Who are we?</strong></p><br><p>Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services for the freight and transit rail sectors. Drawing on more than 150 years of experience, we are leading the way in safety, efficiency, reliability, innovation, and productivity. Whether it’s freight, transit, ports, logistics, mining, industrial, or marine, our expertise, technologies, and people together – are accelerating the future of transportation. With roots that date back to George Westinghouse, Thomas Edison, and Louis Faiveley, Wabtec has always built technologies and implemented solutions for a variety of sectors that are critical to meeting the needs of customers and governments alike.</p><br><p>Our global team of about 30,000 employees worldwide delivers performance that moves the world forward. We’re lifelong learners, obsessed with better. Learn more at www.WabtecCorp.com.</p><br><p><strong>Culture powers us and the possibilities.</strong></p><br><p>We believe the best ideas come from a mix of experiences and backgrounds. At Wabtec, we strive every day to create a place where everyone belongs. We’re building a culture where leadership, inclusion and your unique perspective fuel progress.</p><br><p><br>We’re proud to be an Equal Opportunity Employer. We welcome talent of all backgrounds, experiences, and identities, including race, gender, age, disability, veteran status and more.</p><br><p>Need accommodation? Just let us know - we’ve got you.</p><br> </div>

<p>Supports the development of new production equipment and processes, provides training and technical support to production in coordination with Country and Production Management teams. Supports and applies planning, standardization and realization of Production Engineering activities within the cutting &amp; Wire Preparation Area (Equipment planning, creation and release of master data, etc.). Ensures the implementation of the production concept and integration of new processes in plant in collaboration with Production Concept Team on country level. Supports the definition and implementation of processes and material flows within the Cutting &amp; Wire Preparation Area (CWPA). Ensures the creation and maintenance of manufacturing master data including but not limited to Material Requirements Planning (MRP) and Cutting Area (CAO)optimisation P1/P2 systems, machine attributes and Failure Mode and Effects Analysis FMEA, etc. Creates, modifies and maintains all master data and documentation related to methods of manufacture (work instructions, visual aids, etc.) and ensures machine and operator instructions are present and up to date. Evaluates and manages the implementation of new products and technical changes according to the process description Change Management according CP 2.2.2, Identifies new material configurations (e.g. terminal wire Combinations, splice combinations, twist combinations etc ), Identifies new or obsolete tools &amp; supports the validation activity. Ensures the coordination of activities across departments and monitors results in order to achieve the defined objectives e.g. Provide training and technical support in production. Ensures the validation and release of production equipment and machine settings including but not limited to new material combinations, new tooling, work place layouts and workplace documents etc.</p><p><strong>Desired Candidate Profile</strong></p><p>Education Level : University Degree</p><p>Language : Fluent in English</p><p>Experience: Min 3 years in Production Technology or similar activity</p><p>Communication</p><p>Social &amp; intercultural sensitivity</p><p>Change management</p><p>Target &amp; result orientation</p><p>Motivation &amp; resilience</p><p>Self-organization</p><p>Conflict management</p><p>Teamwork</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>In this role as Engineering Project Leader, impactful projects are led from planning to industrialization, contributing to efficient, compliant, and high-quality manufacturing processes. Working across teams and sites, this position plays a key role in driving continuous improvement, technology transfer, and operational excellence in a dynamic environment.</p><p><b>Grow with us – Your Responsibilities</b></p><br><ul><li>Lead engineering projects from initiation through implementation and closure, ensuring delivery on time, budget, and quality</li><li>Coordinate technology transfer activities across sites, suppliers, and manufacturing facilities to ensure smooth industrialization</li><li>Drive process development and optimization initiatives to improve efficiency, quality, and productivity</li><li>Plan and execute equipment and process qualification activities (IQ, OQ, PQ), including validation of manufacturing equipment, utilities, and processes</li><li>Develop project plans including timelines, budgets, and resource allocation, while tracking performance through KPIs and reporting progress to management</li><li>Perform risk assessments using methodologies such as FMEA and implement mitigation actions to reduce operational risks</li><li>Collaborate with cross-functional teams (Production, Quality, Maintenance, Supply Chain, R&amp;D) and lead continuous improvement and problem-solving activities, including root cause analysis</li><li>Ensure compliance with applicable quality standards, regulatory requirements, and internal processes including CAPA, change control, and deviation management</li></ul><p>​<b>What will convince us</b></p><br><ul><li>Degree in engineering or a related field (not specified in initial input – to be confirmed if required)</li><li>Strong expertise in process and equipment qualification and validation (IQ, OQ, PQ), including commissioning and startup</li><li>Experience in technology transfer and industrialization projects within manufacturing environments</li><li>Solid understanding of manufacturing processes, process optimization, and quality systems (GMP and validation requirements if applicable)</li><li>Knowledge of Lean Manufacturing principles and continuous improvement tools</li><li>Proficiency in project management, including planning, scheduling, and stakeholder coordination</li><li>Experience with risk management methodologies such as FMEA and structured risk assessments</li><li>Strong analytical and problem-solving skills with the ability to manage complex technical challenges</li><li>Excellent communication, leadership, and stakeholder management skills in cross-functional and multi-site environments</li><li>Ability to influence, drive change, and manage multiple priorities in a dynamic and complex setting</li><li>Strong organizational skills, resilience under pressure, and a results-oriented mindset</li><li>High level of collaboration, interpersonal effectiveness, and negotiation and conflict resolution skills</li><li>Professional proficiency in English, both written and spoken</li></ul><p><b>About Sartorius&nbsp;</b></p><br><p>Sartorius is part of the solution in the fight against cancer, dementia, and many other diseases. Our technologies help translate scientific discoveries into real-world medicine faster, so that new therapeutics can reach patients worldwide.&nbsp;</p><br><p>We look for ambitious team players and creative minds, who want to contribute to this goal and advance their careers in a dynamic global environment.</p><br><p>Join our global team and become part of the solution. We are looking forward to receiving your application.&nbsp;<br>www.sartorius.com/careers</p><br> </div>

<p>Company Description LEONI is a global leading provider of products, solutions and services for energy and data management in the automotive industry. With around 95,000 employees in 23 countries and consolidated sales of EUR 3.9 billion in 2025 (excluding the former Automotive Cable Solutions division), we are a leading supplier of complex wiring systems and customer specific cable harnesses. Since 2025, we have been part of the Luxshare Group, a global technology company headquartered in China. Together, we are shaping the future of mobility. Join us and help drive the transformation of the automotive world . Job Description - Manages and supervises the Industrial Engineering org unit according to defined objectives and KPIs - Identifies potential for improvement in area of responsibility, offers consulting and contributes to improvement of service delivery - Takes responsibility for standard &amp; governance adherence and process execution - Leads the direct reports in the area of responsibility - Plans the regular team activity in order to cover all the activity stages and reply to all the requests received - Defines the team members objectives, tasks and responsibilities. Provides clear instructions, monitoring and evaluation of the results - Identifies the training and development needs of direct reports, follows the subordinates' professional development and provides assistance for using newly acquired knowledge - Proposes and applies measures for improving team performance, organizational flexibility, diversity, succession planning, coaching, change management and personal growth Functional accountability for Industrial Engineering on plant level - Manages the coordination and evaluation of time analysis for production processes in order to identify time bottlenecks and improve efficiency - Manages the coordination and evaluation of line balancing analysis ensuring optimization of production processes Qualifications and Experience Level of Education: University degree Branch Of Study: Technical (Mechanical, Electrical, etc.) / Industrial Engineering / Quality / Supply Chain / Management etc Experience: 5 years of experience in the automotive industry Language: French, English Social competences: Communication /Social &amp; intercultural sensitivity / Change management /Target &amp; resultorientation/ Motivation &amp; resilience /Self-organization /Conflict management / Teamwork Professional competences: Inventory Management / Inventory Positioning/ Kanban / Pull Scheduling/ Labeling / Materials Handling / Packaging / Warehouse Management Systems / Materials Replenishment / Shipping Documents / Vendor-Managed Inventory Additional Information Interested? Apply now All jobs People of all genders are always meant equally; for linguistic simplification and better readability, only the masculine form is used in the text. LEONI processes your application data in an IT-system that is consistent across the company and uses Foreign Service providers. By sending your application, you agree to this procedure. LEONI ensures the compliance with data protection.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>University degree in Technical (Mechanical, Electrical, etc.) / Industrial Engineering / Quality / Supply Chain / Management etc.</li><li>5 years of experience in the automotive industry.</li><li>Language: French, English</li><li>Social competences: Communication / Social &amp; intercultural sensitivity / Change management / Target &amp; result orientation / Motivation &amp; resilience / Self-organization / Conflict management / Teamwork</li><li>Professional competences: Inventory Management / Inventory Positioning/ Kanban / Pull Scheduling/ Labeling / Materials Handling / Packaging / Warehouse Management Systems / Materials Replenishment / Shipping Documents / Vendor-Managed Inventory</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Job Description<br><br><p>&nbsp;&nbsp;&nbsp;&nbsp;<strong>Mission</strong></p><br><ul><li><strong>Key missions of the position: </strong></li><li>Facility creation for new projects and process improvements in existing projects in SMO brake panel line and AGTU assembly line</li><li>Responsible for Production Capacity Enhancement to meet the customer demand</li><li>Establishment and prove out the process for New Products</li><li>Collaborate with Production team on day-to-day basis to assess &amp; improve the existing processes</li><li>Lead design, development, and validation of assembly processes for production, ensuring manufacturability and quality</li><li>Establishment of process for new products and process documents like process data sheet (PDS), operation data sheet (ODS), Assembly instructions sheet (AIS), PFMEA etc.,</li></ul><p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<strong>Responsibilities</strong></p><br><ul><li>Design, develop, and optimize jigs, fixtures, tooling, and assembly aids specific to components to ensure precision, repeatability, throughput, safety, and ergonomics</li><li>Develop continuous improvement activities in quality, cycle times, process improvement, machine availability through lean techniques and value engineering to enhance the capability of existing processes and remove waste</li><li>Establishment of process for new products and make corresponding documents like Process flow diagram, Assembly instructions sheet (AIS), PFD, Control plan, PFMEA, Packing Instruction etc.</li><li>Knowledge in preparation of Make/Buy with sourcing team for new projects.</li><li>Requirement review and feasibility confirmation during tender phases.</li><li>Manpower and Layout planning.</li><li>Implementation of TOT (Transfer of Technology) projects from our SISCO and gets approval from customers.</li><li>Planning for developing new product using Advanced Product Quality Planning (APQP), Failure Mode &amp; Effects Analysis to ensure product design and performance as per customer requirements</li><li>To respond to the QRQC issues in SFU.</li><li>Data analysis using Minitab, Power BI or similar tools</li><li>Good understanding of the functioning of machines and test systems including both hardware and software knowledge for realizing the product.</li><li>Good understanding and knowledge to design necessary tools, jigs and fixtures to reduce process timings, improve process flow, ease production and to eliminate wasteful activities.</li><li>Layout optimization to improve efficiency and manufacturing lead time</li><li>Responsible for process design for new products/processes and understanding of Design for Manufacturing(DFM)</li><li>Responsible for process documentation- Report writing, data presentation, procedures, work instructions, etc.</li><li>Responsible for providing all necessary process timings and routing information for all products in SAP/ M3/ ERP system .</li><li>Initiating cost reduction programs to improve yield, productivity, eliminate NVA, improve lead-time etc.&nbsp;&nbsp; Actively involving in cost reduction activities along with design, quality and production teams.</li><li>Identifying the opportunities for improvements and turning them into cost savings</li><li>Good knowledge and working experience in lean manufacturing practices, Kaizen, Six sigma, JIT initiatives, conducting value stream mapping activities and capacity modeling.&nbsp;</li><li>Providing necessary training to staff and technicians on process control tools and techniques</li><li>Conduct analysis of tests results and product performance using statistical methods and tools at regular intervals and suggest changes / modification as necessary</li><li>Budgetary Control for Capital Investment for project and existing products.</li><li>Preparing Return on Investment (ROI) for each capital investment to make justification to Top Management.</li><li>Preparation of Make/Buy with sourcing team for new projects and existing products.</li><li>Analyse process downtime, identify trends and develop solutions.</li><li>Drive &amp; Implement Low-cost automation &amp; Poka-yoke.</li><li>Capacity planning and capability analysis and inputs to Strap and SIOP</li><li>Layout planning and preparation.</li><li>Capex management procurement installation and commissioning of new assets.</li><li>Knowledge on MOST, Time study and method study.</li><li>Automation and exposure with industry 4.0</li><li>Process validation wherever required. Checking critical process parameters regularly and taking corrective actions wherever required.</li><li>Expert in creation and finalization of MBOM / PBOM based on the process requirement and study from EBOM.</li><li>Implementing process control tools such as SPC, control charts etc. Regular monitoring of process capability parameters such as Cp &amp; Cpk values for critical processes</li><li>Assembly line setup - Conveyors, Tools, Machines, Material handling facilities,</li><li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Training, Stage allocation, Layout Preparation and Approval, Tooling</li><li>Identify and implement the productivity improvements through automation, digitization, layout improvements and outsourcing</li><li>first article inspections, measurement systems analysis (MSA), capability studies (Cp, Cpk), process capability</li><li>Conduct time studies, line balancing, throughput optimization, root cause analysis and corrective action implementation to improve yield, reduce cycle time, and minimize scrap.</li><li>Support continuous improvement initiatives (Kaizen, Lean, Six Sigma) to identify and drive cost-saving opportunities and productivity gains in the assembly line.</li><li>Troubleshoot production issues, both tooling/jig issues and assembly process problems to maintain stable, high-quality output</li></ul><p>People Management: YES ¨&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; NO þ</p><br><p>If People Management, how many employees are managed?</p><br><p>Numbers of people&nbsp;: Nil</p><br><p>Budget Management:&nbsp; YES þ&nbsp; NO ¨</p><br><p><strong>Required Candidate Profile</strong></p><br><p><strong>Education/Training</strong></p><br><ul><li><em>What education and education level are necessary for the position?</em></li></ul><p>B.E – Mechanical / Production technology.</p><br><p><strong>Professional</strong><strong> Experience</strong></p><br><ul><li>How many years of professional experience in a specific professional area are required for the position?</li></ul><p>Overall, 15 + years of experience in Process Engineering</p><br><p><strong>Key Competences (Transversal/Professional)</strong></p><br><p><strong>Competence</strong></p><br><p><strong>Level</strong></p><br><p>Study &amp; Analysis High</p><br><p>Oral/ written communication High</p><br><p>Teamwork / Collaboration High</p><br><p>Leadership High</p><br><p><strong>Languages</strong></p><br><p>English, Tamil, Hindi</p><br><br>Additional Information<br><br><p><strong>What could you accomplish in a place that puts People First?</strong></p><br><p>At Wabtec, it’s not just about a job - it’s about the impact you make. When our people come together, we’re Expanding the Possible by continuously improving what we do and how we do it - for our clients and each other.</p><br><p>If you’re ready to revolutionize how the world moves for future generations, Wabtec is the place for you.<br>&nbsp;</p><br><p><strong>Who are we?</strong></p><br><p>Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services for the freight and transit rail sectors. Drawing on more than 150 years of experience, we are leading the way in safety, efficiency, reliability, innovation, and productivity. Whether it’s freight, transit, ports, logistics, mining, industrial, or marine, our expertise, technologies, and people together – are accelerating the future of transportation. With roots that date back to George Westinghouse, Thomas Edison, and Louis Faiveley, Wabtec has always built technologies and implemented solutions for a variety of sectors that are critical to meeting the needs of customers and governments alike.</p><br><p>Our global team of about 30,000 employees worldwide delivers performance that moves the world forward. We’re lifelong learners, obsessed with better. Learn more at www.WabtecCorp.com.</p><br><p><strong>Culture powers us and the possibilities.</strong></p><br><p>We believe the best ideas come from a mix of experiences and backgrounds. At Wabtec, we strive every day to create a place where everyone belongs. We’re building a culture where leadership, inclusion and your unique perspective fuel progress.</p><br><p><br>We’re proud to be an Equal Opportunity Employer. We welcome talent of all backgrounds, experiences, and identities, including race, gender, age, disability, veteran status and more.</p><br><p>Need accommodation? Just let us know - we’ve got you.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> About the Role You’ll design coding tasks that challenge frontier AI coding agents.<br> Each task is a self-contained Docker environment with a broken piece of software; an AI agent attempts the fix; automated tests verify the outcome.<br> Your deliverable is the full task package: broken code, tests, instructions, and a reference solution proving the task is solvable.<br> Responsibilities : Invent a realistic developer scenario — a real bug, a broken ETL, a missing feature — not a toy problem.<br> Build a reproducible Docker environment with pinned dependencies.<br> Write a pytest that verifies outcomes, not specific commands — deterministic, non-flaky, and does not leak the fix.<br> Write an instruction.<br>md that reads like a Jira ticket a developer would receive.<br> Write a reference solve.<br>sh proving the task is solvable.<br> Calibrate difficulty so current state-of-the-art agents solve the task 20–60% of the time.<br> Iterate based on feedback from expert QA reviewers.<br> Later: review other authors’ tasks as a QA reviewer.<br> Not in scope Data labeling, prompt engineering.<br> Production code to ship — you design problems and verification for AI agents.<br> Leetcode puzzles — scenarios must look like real developer work.<br> Not every candidate task ships — quality over quantity.<br> Requirements 3+ years of production software development in one backend stack — Python, Go, Node.<br>js, Java, or Rust.<br> Depth in one stack beats breadth.<br> Python + pytest fluency — required regardless of primary stack.<br> The task harness is pytest-based even when the broken app is in another language.<br> Fixtures, parametrize, monkeypatch, timeouts, conftest.<br>py. Docker authoring — reproducible Dockerfiles, pinned dependencies, multi-stage builds when needed, non-root user.<br> Linux &amp; Bash — comfort debugging inside containers (strace, lsof, journalctl); shell beyond set -euo pipefail.<br> AI coding agent experience — Claude Code, Cursor, Roo Code, or similar, on non-trivial work.<br> You can cite a specific time the AI was confidently wrong and how you caught it.<br> English — B2+ written.<br> Not a fit Data Science, ML, or Computer Vision engineers without backend-engineering output.<br> Manual QA testers without automation or test authoring.<br> Frontend-only, low-code / no-code, IT Support, or Business Analysts.<br> Engineers who have never written pytest from scratch.<br> Junior, intern, or assistant as the most recent role.<br> Preferred qualifications Domain depth in Security, System Administration (nginx / systemd / cron), Scientific Computing (NumPy / PyTorch / SciPy), DevOps, or Git internals.<br> Modern Python tooling (uv, poetry, pyproject.<br>toml). Coverage tooling (pytest-cov, coverage.<br>py, gcov, llvm-cov, kcov).<br> Fuzzing or property-based testing (Hypothesis).<br> Prior contribution to agent-evaluation benchmarks or related frameworks.<br> Process Apply → Pass qualification (90-minute sample-task screen + short behavioral interview) → Join a project → Complete tasks → Get paid.<br> Time commitment Onboarding: ~10 hours per first task.<br> Steady state: ~5 hours per task, 2–4 parallel tasks per author.<br> Realistic weekly load: 8–20 hours.<br> Higher volume available for top performers.<br> You choose when and how to contribute; tasks must be submitted by the deadline and meet acceptance criteria.<br> Compensation: Paid contributions, rates up to $35/hour *.<br> Task-based compensation equivalent to hourly rate, depending on performance and volume.<br> Some projects include incentive payments.<br> *Rates vary based on expertise, skills assessment, location, project needs, and other factors.<br> Higher rates may be provided to highly specialized experts.<br> Lower rates may apply during onboarding or non-core project phases.<br> Payment details are shared per project.<br> Apply Submit your CV via the Mindrift platform.<br> Indicate your English level, note this role (Software Engineering Evaluation Specialist — Terminal Bench), and include a GitHub profile link if available.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supports the development of new production equipment and processes, provides training and technical support to production in coordination with Country and Production Management teams - Supports and applies planning, standardization and realization of Production Engineering activities (Change management, Equipment planning, creation and release of master data, method of manufacture, etc.) - Ensures the implementation of the production concept and integration of new processes in plant in collaboration with Production Concept Team on country level - Supports the definition and implementation of processes and material flows within the Assembly area line setup - Ensures the creation and maintenance of manufacturing master data including but not limited to Material Requirements Planning (MRP), production drawings, bill of material, Manufacturing Execution Systems (MES) data, board designs, Failure Mode and Effects Analysis FMEA, etc. - Creates, modifies and maintains all master data and documentation related to methods of manufacture (work instructions, visual aids, etc.) and ensures machine and operator instructions are present and up to date - Evaluates and manages the implementation of new products and technical changes according to the process description Change Management according CP 2.2.2 - Ensures the validation and release of production equipment including but not limited to new material combinations, new tooling, lay-up boards, module boards, jigs, test tables, boards and work place or station layouts &amp; documents etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>University Degree in a relevant field</li><li>English &amp; French Communication</li><li>Social &amp; intercultural sensitivity</li><li>Change management</li><li>Target &amp; result orientation</li><li>Motivation &amp; resilience</li><li>Self-organization</li><li>Conflict management</li><li>Teamwork</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Company Description LEONI is a global leading provider of products, solutions and services for energy and data management in the automotive industry. With around 86,000 employees in 21 countries and consolidated sales of EUR 3.9 billion in 2025 (excluding the former Automotive Cable Solutions division), we are a leading supplier of complex wiring systems and customer specific cable harnesses. Since 2025 , we have been part of the Luxshare Group , a global technology company headquartered in China. Together, we are shaping the future of mobility. Join us and help drive the transformation of the automotive world.</p><p>Job Description - Manages and supervises the Production Engineering org unit according to defined objectives and KPIs - Designs and leads initiatives with regard to Production Engineering - Takes responsibility for standards, governance and processes in area of responsibility - Defines and steers budgets for the development of activities within area of responsibility - Manages and supervises multiple org units within Production Engineering - Proposes and implements measures for improving team performance, organizational flexibility, diversity, succession planning, coaching, change management and personal growth Functional accountability for Production Engineering on plant level - Directs the execution of activities for Plant Engineering (all product types), Production Engineering activities in projects and the implementation of the production concept - Ensures the implementation of defined standards relating to equipment, processes, software and systems within the Plant Engineering organization - Ensures the support and implementation of product, process optimizations and VAVE coordination</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications and Experience</h2><ul><li><strong>Education</strong> : University degree</li><li><strong>Experience</strong> : Min 7 years of experience in engineering or related position with a minimum of 3 years in Leadership position</li><li><strong>Languages</strong> : Fluent Frensh and English</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Performs and drive efficiency improvement activities - Ensures the implementation of production efficiency monitoring systems including but not limited to KOSU, VSM, 5S, etc. - Performs the analysis of production processes based on standard (IE) methods, detects time bottlenecks, MUDA and implements measures to highlight and resolve - Defines and performs production process balancing according to performed time analysis and implements into the production area - Ensures the creation and maintenance of industrial engineering related manufacturing master data including but not limited to work station documents, MES system data, capacity planning, ramp-up planning, etc. - Supports and ensures the implementation of new products &amp; technical changes (e. g. Change Management according CP2.2.2) - Supports the development of new production equipment and processes in coordination with Country &amp; Production Management teams - Performs time analysis of production processes using REFA or MTM methodology</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education Level : University Degree in a relevant field</li><li>Language: English &amp; French</li><li>Communication</li><li>Social &amp; intercultural sensitivity</li><li>Change management</li><li>Target &amp; result orientation</li><li>Motivation &amp; resilience</li><li>Self-organization</li><li>Conflict management</li><li>Teamwork</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Manages and supervises the Production Engineering Main Harness org unit according to defined objectives and KPIs - Identifies potential for improvement in area of responsibility, offers consulting and contributes to improvement of service delivery - Takes responsibility for standard &amp; governance adherence and process execution - Leads the direct reports in the area of responsibility - Plans the regular team activity in order to cover all the activity stages and reply to all the requests received - Defines the team members objectives, tasks and responsibilities. Provides clear instructions, monitoring and evaluation of the results - Identifies the training and development needs of direct reports, follows the subordinates' professional development and provides assistance for using newly acquired knowledge - Proposes and applies measures for improving team performance, organizational flexibility, diversity, succession planning, coaching, change management and personal growth Functional accountability for Production Engineering Main Harness on country level - Directs the execution of activities for Production Engineering Main Harness e.g. product change management and introduction, engineering Master Data creation (ERP, LEPS, Product FMEA, Method of Manufacture, board designs etc.) Production Engineering activities in projects, implementation of the production concept - Ensures the implementation of defined standards relating to equipment, processes, software and systems within the Plant Engineering organisation - Ensures the support and implementation of product and process optimisations (VA/VE, efficiency projects, process improvements etc.)</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Engineer / Master Degree in a relevant field</li><li>English &amp; French</li><li>Min 5 in a relevant field</li><li>Communication</li><li>Social &amp; intercultural sensitivity</li><li>Change management</li><li>Target &amp; result orientation</li><li>Motivation &amp; resilience</li><li>Self-organization</li><li>Conflict management</li><li>Teamwork</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Role Overview<br> We are expanding our operations in the Democratic Republic of Congo and looking for an exceptional mechanical engineer to join our site team.</p><br><p>If you are a hands-on mechanical expert who thrives in heavy industrial environments and excels at maximizing equipment uptime, diagnosing complex mechanical failures, and optimizing machinery performance, this role is for you! You will be the technical backbone, ensuring our heavy assets operate safely, efficiently, and reliably.</p><br><p>Key Responsibilities<br> Equipment Reliability &amp; Maintenance: Develop and execute comprehensive preventive and predictive maintenance programs for heavy machinery and industrial equipment to maximize operational uptime.</p><br><p>Root-Cause Failure Analysis: Lead investigations into mechanical breakdowns, component failures, and system anomalies. Design and implement permanent engineering solutions to prevent recurrence.</p><br><p>Technical Oversight &amp; Spare Parts Specifications: Define technical specifications for critical spare parts, review material quality, and collaborate with procurement to ensure replacement components meet rigorous engineering standards.</p><br><p>Installation &amp; Commissioning: Oversee the installation, alignment, testing, and commissioning of new mechanical systems, hydraulic/pneumatic circuits, and heavy plant equipment.</p><br><p>Workshop &amp; Team Leadership: Guide on-site technicians and mechanical teams during complex repairs, ensuring strict adherence to safety protocols, quality standards, and standard operating procedures (SOPs).</p><br><br>Qualifications<br><p>Role Requirements &amp; Qualifications<br> Education: Bachelor’s degree in mechanical engineering or a closely related technical engineering discipline.</p><br><p>Language: Proficiency in French (spoken and written) for effective on-site communication and technical oversight.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><strong>Are you ready</strong> to take full ownership of high impact engineering initiatives and shape the future of high-speed manufacturing? As a Project Engineer, you will be the driving force behind the design, execution, and commissioning of multi million dollar capital projects across our state of the art Oral Care product production facility. Seated within the Making division of our world renowned toothpastes and mouthwash rinses, you will be the Engineer conceptualizing the future of our manufacturing capabilities.&nbsp;</p><br> <p>From blank page concept and vendor bidding to line installation, automation integration, and final qualification, you will partner with cross-functional plant leadership and external contractors to transform capital expenditure into operational excellence.</p><br> <p><strong>Your Day to Day and The Future</strong></p><br> <ul> <li> <p>Direct capital projects from initial scope definition and technical feasibility studies through construction, startup, and operational handover.</p><br> </li> <li> <p>Own the Capital Expenditure Budget (CEB) process administer contractor contracts, monitor expenditures, and maintain strict cost control to deliver projects on time and under budget.</p><br> </li> <li> <p>Develop detailed project execution plans, sequence critical path milestones, and resolve operational bottlenecks on the factory floor.</p><br> </li> <li> <p>Study product specifications and performance targets to design technical solutions, specify high-speed processing/packaging machinery, and execute layout studies.</p><br> </li> <li> <p>Lead rigorous testing protocols to confirm equipment reliability, product performance, and full compliance with FDA/cGMP and quality standards.</p><br> </li> <li> <p>Partner with Controls, Reliability, and Safety teams to integrate advanced utility systems, line automation, and digital manufacturing tools into plant workflows.</p><br> </li> <li> <p>Manage RFP/RFQ bidding processes, evaluate technical vendor proposals, and supervise external contractors on-site to enforce strict performance and safety standards.</p><br> </li> <li> <p>Champion Environmental, Occupational Health, and Safety (EOHS) rules across all project sites, keeping every build compliant with OSHA and internal zero-incident safety standards.</p><br> </li> <li> <p>Track and report real-time project metrics, capital spending trends, and risk management plans to executive plant leadership.</p><br> </li> </ul> <p><strong>You'll need to have:</strong>&nbsp;</p><br> <ul> <li> <p>Bachelor of Science in Mechanical, Industrial, or Electrical Engineering (or related engineering discipline).</p><br> </li> <li> <p>4+ years of hands-on engineering experience inside a high-speed cGMP manufacturing environment (CPG, Pharma, Food &amp; Beverage, Personal Care, or related industry)</p><br> </li> <li> <p>Proven track record of managing capital equipment installations, line upgrades, and factory modifications from initial concept through startup</p><br> </li> <li> <p>Practical working knowledge of cGMP standards, validation protocols including Design Qualification, Installation Qualification, Operational Qualification, Performance Qualification, and EOHS/OSHA safety regulations</p><br> </li> <li> <p>Proficiency in CAD software such as AutoCAD or related products</p><br> </li> </ul> <p><strong>Even better if you have:</strong></p><br> <ul> <li> <p>A Master's degree</p><br> </li> <li> <p>Experience with capital budget tracking software such as SAP</p><br> </li> <li> <p>Active Project Management Professional certification</p><br> </li> <li> <p>Hands-on experience with high-speed automated packaging, hygienic design, or liquid processing systems</p><br> </li> <li> <p>Experience managing external engineering firms and construction contractors on active production floors</p><br> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>As a Colgate-Palmolive Packaging Engineer you will be supporting the North America pillar of Oral Care. You will be responsible for the development and implementation of innovative packaging solutions, working collaboratively with the Global and Marketing Divisions, Supply Chain, and Procurement teams. You will also have broad responsibilities in supporting our Manufacturing Operations to drive quality improvements, production efficiencies and cost savings projects. Additionally, you will play a critical role for the technical transfer of projects from Packaging to Operations.</span></p><br> <p><strong><span>Your Day to Day and the Future</span></strong></p><br> <ul> <li> <p><span>Partner closely with North America (NA) Marketing and Design to bring innovative new products and packaging to the market, meeting brand and business requirements</span></p><br> </li> <li> <p><span>Coordinate and execute line trials to ensure package performance across all manufacturing sites, including on-site attendance of component and manufacturing startups (as needed)</span></p><br> </li> <li> <p><span>Analyze packaging quality issues, develop root-cause solutions, and drive the implementation of corrective and preventative actions</span></p><br> </li> <li> <p><span>Conduct vendor qualifications for new packaging materials, ensuring proper validation and manufacturing efficiency</span></p><br> </li> <li> <p><span>Manage the shipment of packaging component samples to cross-functional partners</span></p><br> </li> <li> <p><span>Develop packaging designs for new product launches. You will ensure that all solutions meet the CP requirements for Quality, Sustainability, brand equity, consumer experience, and manufacturing execution</span></p><br> </li> <li> <p><span>Responsible for Technology Transfer from Package Engineering to Manufacturing Operations to ensure new packaging systems perform as designed and meet operational targets</span></p><br> </li> <li> <p><span>Create cost and savings estimates, tooling and package qualification plans, technology transfer documentation (Design History Files) and final package component specifications</span></p><br> </li> <li> <p><span>Create component codes, Bills of Materials (BOMs), Manufacturing Specifications, and develop specific case/cube information</span></p><br> </li> <li> <p><span>Responsible for meeting timeline commitments, including project planning steps, supplier selection, capital expenditure estimates, and technology transfer associated with projects. Manage flow of packaging related information, and communicate project progress, actual costs, and any associated risks</span></p><br> </li> <li> <p><span>Interface with the Innovation teams to identify new and innovative packaging solutions, and work with other cross-functional teams to bring them to life through meticulous planning, design execution, and rigorous testing</span></p><br> </li> <li> <p><span>Help identify or execute cost saving opportunities in your area of responsibility, and work towards implementation together with multiple cross-functional collaborators</span></p><br> </li> </ul> <p><strong><span>You'll need to have:</span></strong></p><br> <ul> <li> <p><span>Bachelor's Degree in Package Engineering/Technology/Science or related field</span></p><br> </li> <li> <p><span>3+ years Package Development or similar Engineering experience&nbsp;</span></p><br> </li> <li> <p><span>Fundamental understanding of printing and decoration techniques for plastics, labels, or paperboard materials</span></p><br> </li> <li> <p><span>Knowledge of laminate tubes, PET bottles, paperboard folding cartons, or corrugated shippers</span></p><br> </li> </ul> <p><strong><span>Even better if you have:</span></strong></p><br> <ul> <li> <p><span>Experience working in a complex manufacturing or plant environment, with the ability to operate as a self-starter and communicate effectively with senior leaders and remote team members</span></p><br> </li> <li> <p><span>Product design and development experience in the CPG field</span></p><br> </li> <li> <p><span>Understanding of extrusion blow molding, injection molding, paperboard and corrugated packaging designs.&nbsp;</span></p><br> </li> <li> <p><span>Product testing, data collection, data analysis and assessing pass / fail criteria to determine final product approval</span></p><br> </li> <li> <p><span>Knowledge of packaging materials and conversion processes, such as extrusion blow molding, injection molding, and exposure to final product filling and assembly</span></p><br> </li> <li> <p><span>Experience using Google Suite applications, SAP or other ERP software and/or similar computer systems.</span></p><br> </li> <li> <p><span>Experience with CapePack or Tops software for case/cube development</span></p><br> </li> </ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Systems Engineer &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</strong></p><br><p>We are looking for a Systems Engineer to work closely with a sales representative in a defined territory. The Systems Engineer's main mission will be to support the sales organization in all technical matters regarding pre-sales, sales calls, and post-sales.</p><br><p><strong><u>With us you will</u></strong></p><br><ul> <li>Lead all technical aspects of a sales cycle with customers, from the initial RFIs, through to RFPs &amp; RFQs when required. This includes the project management and active participation in POCs in partnership with the relevant teams both internally and within the customer and/or commercial partner.</li> <li>Have the ability to listen and to understand the technical requirements of the customer, reading between the lines to build a solution which outperforms the competitor offering.</li> <li>Be the primary technical point of contact for the customer(s) and partners in close collaboration with your sales partner.</li> <li>Continuously strive to improve knowledge around the Fortinet products and solutions, along with maintaining a deep understanding of the competitive landscape and Fortinet’s ability to provide long lasting protection against the ever-evolving threats.</li> <li>Have a strong ability to position Fortinet solutions to the customer, whether this be remotely or in person. This requires strong communication skills and the ability to confidently present through whiteboarding, technical white papers, technical plans or customer discussions.</li> <li>Manage your time effectively when working on multiple deals simultaneously, ensuring a positive customer experience is maintained.</li></ul><p><strong><u>Apply if you</u></strong></p><br><ul> <li>Have Knowledge of the following technologies: Routing, Switching, VPN, LAN, WAN, VLAN, Network Security, Firewall, Intrusion Detection, and anti-virus.</li> <li>Solid understanding of most of the following technologies and protocols: SD-WAN, SASE, ZTNA, SIEM, XDR, EDR, WAF, Email Security, NAC, CASB, RADIUS, PKI, IKE, Certificates,&nbsp;</li> <li>Strong presentation skills in French and in English</li> <li>Are currently or have previously worked in a pre-sales engineer role, managing end to end technical aspects of deals, through to technical closure.</li> <li>Can demonstrate your problem solving skills and how this has impacted key wins within your current organisation.</li> <li>Understand and can demonstrate your ability to build and maintain customer relationships, including your ability to effectively communicate technically to a range of both external and internal stakeholders.</li> <li>Fluency in English is a must&nbsp;</li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Frontier coding agents are already good at passing tests.<br> We measure whether they pass them the right way .<br>We're building a dataset to evaluate the safety and conduct of AI coding agents — not just whether they complete a task, but whether they do it honestly, within scope, and without cutting corners.<br>You'll design tasks where the easy path is the unsafe one, and write the tests that catch it: Build realistic developer environments — a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks that pair a benign development goal with a tempting unsafe shortcut: scope creep, policy violations, data corruption, over-permissive changes Write tests that verify whether the agent completed the task the right way — catching corners cut, not just checking outputs Iterate on tasks and tests based on QA feedback — review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling; Not prompt engineering; Not cybersecurity or red-teaming — there is no attacker in the scenario.<br> Cybersecurity experience is a nice-to-have but not a requirement.<br> We're looking for engineers who understand how code should behave, not penetration testers.<br> Strong software engineers, not security specialists; Not writing code from scratch — the agent writes most of the code; you design the situation and evaluate the outcome; What we look for 4–5+ years in software development; Core stack: Python, JavaScript/TypeScript; Strong test design skills — functional and integration tests that separate safe from unsafe completion, not just correct from incorrect; Hands-on experience with coding agents (Claude Code, GitHub Copilot CLI, Codex, or similar); Familiarity with GitHub PRs and CI workflows as a user; Stack breadth is welcome, not a filter.<br> Tasks simulate real repositories with databases, CI pipelines, and deploy scripts, so wider backend and infrastructure exposure is genuinely useful — but you don't need to be an expert in every layer; English proficiency — B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> The real difficulty is building the temptation — a scenario where the unsafe or out-of-scope path is the path of least resistance — and then writing tests that reliably catch an agent that took it.<br> Tasks have many valid solutions; tests must accept all of them and reject the bad ones.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 20-25 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation On this project, contributors can earn up to $50 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Frontier coding agents are already good at passing tests.<br> We measure whether they pass them the right way .<br>We're building a dataset to evaluate the safety and conduct of AI coding agents — not just whether they complete a task, but whether they do it honestly, within scope, and without cutting corners.<br>You'll design tasks where the easy path is the unsafe one, and write the tests that catch it: Build realistic developer environments — a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks that pair a benign development goal with a tempting unsafe shortcut: scope creep, policy violations, data corruption, over-permissive changes Write tests that verify whether the agent completed the task the right way — catching corners cut, not just checking outputs Iterate on tasks and tests based on QA feedback — review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling; Not prompt engineering; Not cybersecurity or red-teaming — there is no attacker in the scenario.<br> Cybersecurity experience is a nice-to-have but not a requirement.<br> We're looking for engineers who understand how code should behave, not penetration testers.<br> Strong software engineers, not security specialists; Not writing code from scratch — the agent writes most of the code; you design the situation and evaluate the outcome; What we look for 4–5+ years in software development; Core stack: Python, JavaScript/TypeScript; Strong test design skills — functional and integration tests that separate safe from unsafe completion, not just correct from incorrect; Hands-on experience with coding agents (Claude Code, GitHub Copilot CLI, Codex, or similar); Familiarity with GitHub PRs and CI workflows as a user; Stack breadth is welcome, not a filter.<br> Tasks simulate real repositories with databases, CI pipelines, and deploy scripts, so wider backend and infrastructure exposure is genuinely useful — but you don't need to be an expert in every layer; English proficiency — B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> The real difficulty is building the temptation — a scenario where the unsafe or out-of-scope path is the path of least resistance — and then writing tests that reliably catch an agent that took it.<br> Tasks have many valid solutions; tests must accept all of them and reject the bad ones.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 20-25 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation On this project, contributors can earn up to $50 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Position:</b>Applications Engineer<br><b>Job Description:</b><p><span><b><span>What You’ll Be Doing:</span></b></span></p><br><br><ul><li><p><span>Designs and develops software solutions to meet business requirements. Manages full software development life cycle including testing, implementation, and auditing. Performs product design, bug verification, and beta support, which may require research and analysis. Operates under moderate supervision. Usually reports to the Manager of Software Development. </span></p><br><br></li><li><p><span>Execute, assess, and troubleshoot software programs and applications. Analyze and amend software errors in a timely and accurate fashion. </span></p><br><br></li><li><p><span>Coding, developing, and documenting software specifications throughout the project life cycle. Participate in software upgrades, revisions, fixes and patches as mandated by the vendor.</span></p><br><br></li></ul><br><p><span><b><span>What We Are Looking For:</span></b></span></p><br><br><ul><li><p><span>Typically requires 5–7 years of related experience with a 4 year degree; or 3 years and an advanced degree; or equivalent work experience.</span></p><br><br></li><li><p><span>Requires in-depth knowledge and experience </span></p><br><br></li><li><p><span>Solves complex problems; takes a new perspective using existing solutions </span></p><br><br></li><li><p><span>Works independently; receives minimal guidance </span></p><br><br></li><li><p><span>Acts as a resource for colleagues with less experience </span></p><br><br></li><li><p><span>Represents the level at which career may stabilize for many years or even until retirement </span></p><br><br></li><li><p><span>Contributes to process improvements </span></p><br><br></li><li><p><span>Typically resolves problems using existing solutions </span></p><br><br></li><li><p><span>Provides informal guidance to junior staff </span></p><br><br></li><li><p><span>Works with minimal guidance</span></p><br><br></li></ul><br><p><b><span>Work Arrangement: </span></b><span><span>Fully In Office: Monday-Friday&nbsp;</span></span></p><br><br><br><p><span><b><span>What’s In It For You:</span></b></span></p><br><br><p><span>At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That’s why we offer competitive financial compensation, including various compensation plans and a solid benefits package.&nbsp;</span></p><br><br><br><ul><li><p><span><span>Medical, Dental, Vision Insurance&nbsp;</span></span></p><br><br></li><li><p><span><span>401k, With Matching Contributions&nbsp;</span></span></p><br><br></li><li><p><span><span>Paid Time Off</span></span><span><span>(including</span><span>sick</span><span>, holiday, vacation, etc.)</span></span></p><br><br></li><li><p><span><span>Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options&nbsp;</span></span></p><br><br></li><li><p><span><span>Growth Opportunities&nbsp;</span></span></p><br><br></li><li><p><span><span>Tuition Reimbursement</span></span></p><br><br></li><li><p><span><span>Short-Term/Long-Term Disability Insurance&nbsp;</span></span></p><br><br></li><li><p><span><span>Climate controlled environment with excellent break room facilities&nbsp;</span></span></p><br><br></li><li><p><span><span>Located in central Reno, near public transportation (RTC Route 56)</span></span></p><br><br></li><li><p><span><span>And more!</span></span> ​</p><br><br></li></ul><br><p>Are you being referred to one of our roles? If so, ask your connection at Arrow about our Employee Referral Process!&nbsp;</p><br><br><br><br><b>Annual Hiring Range/Hourly Rate:</b><br>$87,900.00 - $115,115.00<br><p><span>Actual compensation offer to candidate may vary from posted hiring range based upon geographic location, work experience, education, and/or skill level. The pay ratio between base pay and target incentive (if applicable) will be finalized at offer.</span></p><br><br><b>Location:</b>US-NV-Reno, Nevada (Maestro Dr)<br>Remote work employees may be required to be present at the closest designated Arrow office for work-related purposes, at the Company’s request and sole discretion.<br><b>Time Type:</b>Full time<br><b>Job Category:</b>Information Technology<br><b>EEO Statement:</b><p><span>Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status.&nbsp;</span>(Arrow EEO/AAP policy)</p><br><br><p><br><i>All Arrow job postings are for existing job vacancies</i>. <i>We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.</i></p><br><br><br><p><i><span>In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.</span></i></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Who We Are</b><p><b>ABOUT ENOVIS™</b></p><br><p>Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company’s extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond.&nbsp;For more information about Enovis, please visit www.enovis.com.</p><br><p><b>What You'll Do</b></p><br><p>Discovers, develops and evaluates new product ideas, enhancements to existing products or strategic product extensions, and translates research discoveries into usable and marketable products. Leads, plans and tracks all phases of the product life cycle, from inception to introduction into the marketplace. Appraises new product ideas to determine their potential to address customer needs and to achieve goals in revenue growth and market share. Establishes product specifications and coordinates with various functions, including Engineering, Manufacturing, Marketing and Sales, to ensure successful product development and implementation. Learns to use professional concepts, applications of basic principles, and theories. Solves routine problems of limited scope and complexity following established policies and procedures. Normally receives detailed instructions on most work. Typically requires a degree and little to no previous professional experience.</p><br><p><b><span>EQUAL EMPLOYMENT OPPORTUNITY</span></b><span><br>Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees’ beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Who We Are</b><p><b>ABOUT ENOVIS™</b></p><br><p>Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company’s extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond.&nbsp;For more information about Enovis, please visit www.enovis.com.</p><br><p><b>What You'll Do</b></p><br><p>Discovers, develops and evaluates new product ideas, enhancements to existing products or strategic product extensions, and translates research discoveries into usable and marketable products. Leads, plans and tracks all phases of the product life cycle, from inception to introduction into the marketplace. Appraises new product ideas to determine their potential to address customer needs and to achieve goals in revenue growth and market share. Establishes product specifications and coordinates with various functions, including Engineering, Manufacturing, Marketing and Sales, to ensure successful product development and implementation. Learns to use professional concepts, applications of basic principles, and theories. Solves routine problems of limited scope and complexity following established policies and procedures. Normally receives detailed instructions on most work. Typically requires a degree and little to no previous professional experience.</p><br><p><b><span>EQUAL EMPLOYMENT OPPORTUNITY</span></b><span><br>Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees’ beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis.</span></p><br> </div>

<p>Mechanical Engineer, with experience in heavy equipment, trucks, and vehicles, as well as solid knowledge of troubleshooting and supervising maintenance and repair operations.<br><br>The candidate must be capable of managing and overseeing the workshop and mechanics, organizing workflows, and ensuring maintenance quality. Strong character, quick decision-making abilities, and the capacity to assume responsibility and resolve problems are essential.<br><br>Practical experience and proficiency in handling equipment and technical teams are among the key requirements.</p><p>&nbsp;</p>