Inspection Engineer Jobs in Tunisia

<p>Accomplishes specific tasks within the Assembly area, (e.g. representative not full list) - Performs all checks as defined in the Quality control plan and records the required data - Identifies non-conforming products with "red card" process - Distributes and collects PDEK or other control charts - Gives feedback to line and to WPA for all non-conformities found on the assembly line (e.g. electrical test, clip test, inspection points, care points, etc.) by using the stop at first defect process - Inspects 5S / housekeeping application within the area of responsibility - Identifies areas of product risk e.g. material on the floor, terminals damaged, bent within holders, stands, mixed components, etc. - Checks that operators are qualified to work on the station in line with the skills matrix - Checks adherence to OK to Start procedure at the start of each shift - Performs check of error proofing conformity within the assembly area (e.g. good/bad sample test release, poka- yoke, jigs, etc.) - Varifies that assembly aid tools are available and used in proper condition (e.g. convolute and corrugated tube aids, pvc tube aids, etc.) - Validates the completion of the packing process and conformity according to work instructions - Ensures that in-line and off-line reworks are performed by qualified operators with released tools and respecting rework procedures - Inspects if documentation in workstation according to control plan and internal standards is followed - Audits final harness inspection in accordance with the QM plan and or additional care points</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Min BAC</li><li>English &amp; French</li><li>1 year Experience</li></ul><p>LEONI Communication Social &amp; intercultural sensitivity Change management Target &amp; result orientation Motivation &amp; resilience Self-organization Conflict management Teamwork</p>

<p>Accomplishes specific tasks within the Assembly area, (e.g. representative not full list)</p><p>Performs all checks as defined in the Quality control plan and records the required data</p><p>Identifies non-conforming products with "red card" process</p><p>Distributes and collects PDEK or other control charts</p><p>Gives feedback to line and to WPA for all non-conformities found on the assembly line (e.g. electrical test, clip test, inspection points, care points, etc.) by using the stop at first defect process</p><p>Inspects 5S / housekeeping application within the area of responsibility</p><p>Identifies areas of product risk e.g. material on the floor, terminals damaged, bent within holders, stands, mixed components, etc.</p><p>Checks that operators are qualified to work on the station in line with the skills matrix</p><p>Checks adherence to OK to Start procedure at the start of each shift</p><p>Performs check of error proofing conformity within the assembly area (e.g. good/bad sample test release, poka- yoke, jigs, etc.)</p><p>Verifies that assembly aid tools are available and used in proper condition (e.g. convolute and corrugated tube aids, pvc tube aids, etc.)</p><p>Validates the completion of the packing process and conformity according to work instructions</p><p>Ensures that in-line and off-line reworks are performed by qualified operators with released tools and respecting rework procedures</p><p>Inspects if documentation in workstation according to control plan and internal standards is followed</p><p>Audits final harness inspection in accordance with the QM plan and or additional care points</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications and Experience</strong></p><ul><li>Level of Education : Bac with 1 year of experience</li><li>Language : French &amp; English</li><li>IT: Microsoft Office</li><li>Social competences: Communication /Social &amp; intercultural sensitivity / Change management /Target &amp; result-orientation/ Motivation &amp; resilience /Self-organization /Conflict management / Teamwork</li><li>Professional competences: Knowledge of Quality Tools &amp; Audit</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Are you curious, motivated, and forward-thinking? At FIS you’ll have the opportunity to work on some of the most challenging and relevant issues in financial services and technology. Our talented people empower us, and we believe in being part of a team that is open, collaborative, entrepreneurial, passionate and above all fun. <b>#LI-RB1</b> <b>#LI-Hybrid</b>&nbsp;</p><br><p><b><u>About the Team:</u></b></p><br><p>The EMEA End User Computing (EUC) Team is responsible for delivering a second level IT Support for nearshore employees in Tunisia.</p><br><p>With an advanced knowledge of FIS computing environment, the EUC team manages efficiently users’ issues and provides the suitable solutions that aim to maintain productivity as per the BUs expectations.</p><br><p>The team is continuously reviewing and implementing services’ improvements for a better user experience.</p><br><p>Supporting Corporate IT initiatives and local infrastructure projects through effective contribution is also part of its duties.</p><br><p>Added to that, the team is responsible for maintaining secure and compliant FIS computing environment via smart monitoring and targeted/corrective actions.</p><br><p><b><u>What you will be doing:</u></b></p><br><ul><li>Provide day to day EUC Support for EMEA Nearshore office in Tunisia.</li><li>Build a good customer relationship and trust.</li><li>Contribute in Corporate IT initiatives and projects under EUC.</li><li>Strong collaboration with Infrastructure Team in local projects.</li><li>Acceptable knowledge in IT infrastructure and networking is needed.</li><li>Point of contact for all IT related issues or requests (1st PoC being the Employee Support Helpdesk).</li><li>End User environment communications and trainings.</li><li>VMs provisioning.</li><li>Create/Update documentation related end users (e.g. Welcome email, joiner/leaver check lists).</li><li>Maintain Legal Hold tracking.</li></ul><p><b><u>What you bring:</u></b></p><br><p>The role of IT Desktop Support Engineer requires good understanding, knowledge, and experience in areas of:</p><br><p><u>Desktops and Laptops:</u></p><br><ul><li>Deploy Windows image, Configure, Deliver and Dispose.</li><li>Support and Repair (liaise with vendor for hardware repair).</li><li>Hardware assets management by maintaining accurate inventory.</li><li>Manage assets life cycle.</li></ul><p><u>Applications:</u></p><br><ul><li>Install End User software (licensing validity and availability checks).</li><li>Deployment of new applications (and/or upgrades) and follow up.</li><li>Review Unauthorized and End of Life Software and remediate.</li></ul><p><u>Logical Security and Compliance:</u></p><br><ul><li>Microsoft Windows patching (Desktop OS).</li><li>Non-Windows Desktop OS patching (e.g. Mac OS).</li><li>Applications patching and upgrades (e.g. Java, Adobe Flash).</li><li>Review Encryption and Security Endpoint controls and remediate as appropriate.</li><li>Administrative Privileges Management (Beyond Trust administration).</li><li>Manage RMIS and vulnerabilities for laptops and workstations.</li></ul><p><u>Network and Telecom:</u></p><br><ul><li>Switch access VLAN assignment (if not automatic).</li><li>Wireless access support.</li><li>Desk phone/softphone setup (eg. 8X8, Avaya, etc...)</li><li>Video Conferencing System support</li><li>Meeting Room Health Check</li><li>Mobile phone support</li></ul><p><u>Access Management:</u></p><br><ul><li>Network share management.</li><li>MFD Support.</li><li>MS Teams and VC support.</li></ul><p><b><u>What we offer you:</u></b></p><br><ul><li>A modern, international work environment and a dedicated and motivated team.</li><li>A multifaceted job with a high degree of responsibility and a broad spectrum of opportunities.</li><li>Competitive salary and excellent bonus potential.</li><li><span>A broad range of professional education and personal development possibilities – FIS is your final career step!</span></li></ul><p><b>Privacy Statement</b></p><br><p>FIS is committed to protecting the privacy and security of all personal information that we process in order to provide services to our clients. For specific information on how FIS protects personal information online, please see the Online Privacy Notice.</p><br><p><b>Sourcing Model</b></p><br><p>Recruitment at FIS works primarily on a direct sourcing model; a relatively small portion of our hiring is through recruitment agencies. FIS does not accept resumes from recruitment agencies which are not on the preferred supplier list and is not responsible for any related fees for resumes submitted to job postings, our employees, or any other part of our company.</p><br><p>#pridepass</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mindrift is looking for highly skilled Vibecode specialists to join the Tendem project (https://tendem.<br>ai/) and drive specialized data scraping workflows for real-world use cases.<br> Mindrift is looking for highly skilled Senior Python Data Scraping Engineers to join the Tendem project and drive specialized data scraping workflows for real-world applications.<br> In this role, you'll apply your expertise in web scraping, data extraction, and data processing to deliver accurate, reliable, and high-quality results.<br> This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction and processing.<br> What We Do The Mindrift platform connects specialists with innovative technology projects.<br> Our mission is to help develop high-quality AI technologies by combining real-world expertise from professionals across the globe with advanced AI development efforts.<br> About the Role This is a freelance role for a Tendem project.<br> As a Senior Python Data Scraping Engineer , you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing tools such as Apify, OpenRouter, and other technologies, alongside your own technical expertise and approaches.<br> Key Responsibilities Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets.<br> Leverage available tools and custom workflows to accelerate data collection, validation, and task execution while meeting defined requirement.<br> Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior.<br> Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery.<br> Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.<br> Educational qualifications At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required).<br> Bachelor’s or Master’s Degree in Engineering, Applied Mathematics, Computer Science, or related technical fields is a plus.<br> Academic and/or Professional Experience Candidates should have a strong technical foundation and practical experience with scripting, automation, and data extraction workflows.<br> We are looking for specialists who can solve non-trivial problems, work confidently with modern development tools and technologies, and systematically collect, structure, and validate data from diverse sources.<br> A methodical, detail-oriented approach and the ability to work independently are essential.<br> Technical Skills (Essential) Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML) Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets) Additional requirements Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks Strong attention to detail and commitment to data accuracy Self-directed work ethic with ability to troubleshoot independently A link to GitHub is a plus English proficiency: Upper-intermediate (B2) or above (required) Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $25 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<h3>ROLE OVERVIEW</h3>Hands-on senior full-stack engineering role combining AWS cloud-native development, technical ownership, architectural collaboration and delivery leadership.<br><br><h3>About the Role</h3> As a Senior Full-Stack Developer, you will play a key role in shaping the technical direction and implementation of partner-enabled services. You will work closely with Solution Architects, Project Managers, Full-Stack Developers, Designers, Product Managers, Business Analysts, and UI/UX specialists to enhance and scale the existing service portfolio, partner enablers, APIs, and developer platform. This is a hands-on position for an experienced engineer who can take technical ownership, contribute throughout the development lifecycle, and help create scalable, maintainable, secure, and high-performing solutions across back-end and front-end applications.<br><br><h3>Key Responsibilities</h3> <ul> <li><strong>Technical Leadership:</strong> Drive technical work together with the Project Manager and Solution Architect. Take ownership of development tasks, contribute hands-on, lead technical initiatives, conduct code reviews, provide technical guidance, and promote continuous improvement.</li> <li><strong>System Development &amp; Implementation:</strong> Design, develop, maintain, and evolve partner solutions, reusable components, service enablers, APIs, and full-stack applications using modern engineering practices.</li> <li><strong>Cross-Functional Collaboration:</strong> Work with architecture, product, design, business analysis, UI/UX, and development teams to understand requirements, define technical solutions, and ensure seamless front-end and back-end integration.</li> <li><strong>Architectural Support:</strong> Support the Solution Architect with application architecture and technical roadmap activities. Advocate scalable and maintainable designs and evaluate technologies and frameworks that can improve engineering efficiency and user experience.</li> <li><strong>Quality Engineering:</strong> Establish and follow coding standards, development best practices, automated testing strategies, code reviews, performance optimization, and engineering quality controls to deliver reliable solutions.</li> <li><strong>Documentation &amp; Knowledge Sharing:</strong> Create and maintain technical documentation, development guidelines, reusable patterns, and team standards. Participate in onboarding, workshops, and knowledge-sharing activities.</li> <li><strong>Innovation &amp; AI Enablement:</strong> Explore and apply modern engineering practices, including AI-assisted development, where appropriate to improve productivity, delivery speed, and software quality.</li> <li><strong>API &amp; Service Evolution:</strong> Help drive the evolution of partner service enablers and APIs, ensuring consistency, scalability, performance, reliability, and maintainability across applications.</li> </ul> <h3>Must-Have Skills</h3> <ul> <li>Strong professional experience with TypeScript and modern full-stack application development.</li> <li>Deep hands-on experience with AWS, including serverless architectures and cloud-native services.</li> <li>Hands-on development experience with Node.js and React.js.</li> <li>Experience designing, developing, and integrating REST APIs or comparable service interfaces.</li> <li>Experience with Infrastructure as Code (IaC); practical AWS CDK experience is strongly preferred.</li> <li>Understanding of scalable application architecture, reusable components, integration patterns, performance, and maintainability.</li> <li>Experience with automated testing, code reviews, coding standards, debugging, performance optimization, and software quality practices.</li> <li>Ability to take technical ownership and move development forward in collaboration with architects, project leads, and cross-functional stakeholders.</li> <li>Strong analytical problem-solving skills and the ability to break complex problems into manageable technical solutions.</li> <li>Fluent English communication skills, both written and spoken.</li> </ul> <h3>Good-to-Have Skills</h3> <ul> <li>Experience in the automotive industry or an automotive-related digital/service environment.</li> <li>Hands-on experience with AWS CDK, if IaC experience has primarily been gained with other tools.</li> <li>Experience with AI-assisted software development, generative AI tools, or other modern innovation practices that improve engineering productivity.</li> <li>Experience contributing to architectural design, technology evaluation, and application technical roadmaps.</li> <li>Experience creating reusable developer-platform components, partner enablers, SDKs, or service frameworks.</li> <li>Experience facilitating technical workshops, onboarding engineers, mentoring, or sharing development standards and patterns.</li> <li>Ability to create and present technical concepts and innovative ideas to both technical and non-technical stakeholders.</li> </ul> <h3>Location &amp; Work Model</h3> Primary location: Lindholmen Science Park, Gothenburg, Sweden. Hybrid work model, combining office-based work with working from home a few days each week. Candidates who are not EU citizens must hold a valid work permit for Sweden. Share<p><strong>Desired Candidate Profile</strong></p><h3>Education</h3> Bachelor's degree or higher in Computer Science, Software Engineering, Information Technology, or another relevant field.<br><br><h3>Experience</h3> Recommended experience level: 6+ years of professional software development experience, with several years of hands-on full-stack development in complex production environments. Candidates should demonstrate senior-level technical ownership and strong practical experience with the core stack rather than only listed skills or certifications. The original requirement specifies several years of experience in complex software development without stating an exact number. The 6+ years threshold is therefore an appropriate recruiting benchmark for the level of technical ownership, hands-on delivery, code review, architectural participation, and guidance expected in this role.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Job Description<br><br><p><strong>Job Description</strong></p><br><p><strong>Job Title:</strong> Engineer-Warehouse</p><br><p><strong>Entity\Location:</strong></p><br><p><strong>Department:</strong> Warehouse &amp; Logistics, SCM</p><br><p><strong>Hierarchical Manager(s) Title(s)</strong></p><br><p><strong>Functional Manager(s) Title(s) </strong></p><br><p><strong>Mission</strong></p><br><p><strong>Key missions of the position: </strong></p><br><ul><li>Ensure efficient <strong>store operations</strong> including receipt, storage, and issue of materials to support production schedules.</li><li>Maintain accurate <strong>inventory records and stock visibility</strong> for internal stakeholders.</li><li>Ensure proper <strong>material handling, storage practices, and compliance with standards (5S/TPM/TQM)</strong>.</li></ul><p><strong>Measurement</strong></p><br><p><strong>Q (Quality):</strong></p><br><ul><li>Inventory accuracy and record maintenance</li><li>Compliance with 5S / TPM / audit standards</li></ul><p><strong>C (Cost):</strong></p><br><ul><li>Avoidance of material damage / deterioration</li><li>Proper handling of rejected / excess materials</li></ul><p><strong>D (Delivery):</strong></p><br><ul><li>Timely material issue to production</li><li>Availability of materials as per production schedule</li></ul><p><strong>Additional KPIs:</strong></p><br><ul><li>Completion of stock verification (perpetual &amp; annual)</li><li>Timely updation of ERP transactions</li></ul><p><strong>Main responsibilities:</strong></p><br><p><strong>Store Operations Management</strong></p><br><ul><li>Manage component store including <strong>receiving, safekeeping, accounting, and issuing materials</strong>.</li><li>Ensure materials are available to meet <strong>monthly production schedules</strong></li></ul><p><strong>Inventory Control &amp; Monitoring</strong></p><br><ul><li>Maintain accurate inventory records and provide <strong>timely inventory status</strong> to users.</li><li>Conduct <strong>perpetual inventory and annual stock verification</strong>, including reconciliation.</li><li>Monitor inventory levels and provide alerts to SCM for necessary actions.</li></ul><p><strong>Material Handling &amp; Storage</strong></p><br><ul><li>Ensure proper storage practices to avoid <strong>damage or deterioration of materials</strong>.</li><li>Maintain shelf-life items as per defined work instructions.</li><li>Identify and manage <strong>rejected materials (return/storage/disposal)</strong></li></ul><p><strong>System &amp; Documentation</strong></p><br><ul><li>Update all store transactions in <strong>ERP systems (Oracle)</strong> on real-time basis.</li><li>Maintain proper documentation for all store transactions.</li></ul><p><strong>Dispatch &amp; Coordination</strong></p><br><ul><li>Dispatch materials to subcontractors after proper <strong>verification of documents and materials</strong>.</li><li>Coordinate with Purchase, Quality, and other departments for store-related activities.</li></ul><p><strong>Compliance &amp; Housekeeping</strong></p><br><ul><li>Ensure compliance with <strong>5S / TQM / TPM / EMS standards</strong>.</li><li>Maintain good housekeeping and safe working practices in stores.</li></ul><p><strong>Support &amp; Additional Responsibilities</strong></p><br><ul><li>Assist Store Manager in overall store operations.</li><li>Handle any additional responsibilities assigned from time to time.</li></ul><p>People Management: YES __&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; NO ¨</p><br><p>If People Management, how many employees are managed? &nbsp;</p><br><p>Number of people&nbsp;:</p><br><p>Budget Management:&nbsp; YES ¨&nbsp; NO __</p><br><p><strong>Required Candidate Profile</strong></p><br><p><strong>Education/Training</strong></p><br><ul><li><em>B.Com / B.A / Diploma in Supply Chain Management</em></li></ul><p><strong>Professional Experience</strong></p><br><ul><li>Minimum 6 years of experience in <strong>stores / warehouse operations</strong></li></ul><p><strong>Key Competences (Transversal/Professional)</strong></p><br><p><strong>Competency</strong></p><br><p><strong>Level</strong></p><br><p>Material Handling, Storage &amp; Line Feeding <strong>4</strong></p><br><p>Inventory &amp; Warehouse Control <strong>3</strong></p><br><p>Supply Chain &amp; Operations Management <strong>3</strong></p><br><p>Digital &amp; Systems Capability <strong>2</strong></p><br><p>People / Stakeholder Management <strong>2</strong></p><br><p>Presentation &amp; Communication Skills <strong>2</strong></p><br><p><strong>Languages</strong></p><br><ul><li>English (Preferred)</li><li>Hindi</li></ul><p><strong>Other Specifications</strong></p><br><p><strong>Behavioural and Skills</strong></p><br><ul><li>Good understanding of <strong>store operations and inventory processes</strong></li><li>Ability to handle <strong>store manpower and coordination activities</strong></li><li>Basic knowledge of <strong>ERP systems and documentation</strong></li><li>Strong focus on <strong>discipline, accuracy, and compliance</strong></li></ul><br>Additional Information<br><br><p><strong>What could you accomplish in a place that puts People First?</strong></p><br><p>At Wabtec, it’s not just about a job - it’s about the impact you make. When our people come together, we’re Expanding the Possible by continuously improving what we do and how we do it - for our clients and each other.</p><br><p>If you’re ready to revolutionize how the world moves for future generations, Wabtec is the place for you.<br>&nbsp;</p><br><p><strong>Who are we?</strong></p><br><p>Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services for the freight and transit rail sectors. Drawing on more than 150 years of experience, we are leading the way in safety, efficiency, reliability, innovation, and productivity. Whether it’s freight, transit, ports, logistics, mining, industrial, or marine, our expertise, technologies, and people together – are accelerating the future of transportation. With roots that date back to George Westinghouse, Thomas Edison, and Louis Faiveley, Wabtec has always built technologies and implemented solutions for a variety of sectors that are critical to meeting the needs of customers and governments alike.</p><br><p>Our global team of about 30,000 employees worldwide delivers performance that moves the world forward. We’re lifelong learners, obsessed with better. Learn more at www.WabtecCorp.com.</p><br><p><strong>Culture powers us and the possibilities.</strong></p><br><p>We believe the best ideas come from a mix of experiences and backgrounds. At Wabtec, we strive every day to create a place where everyone belongs. We’re building a culture where leadership, inclusion and your unique perspective fuel progress.</p><br><p><br>We’re proud to be an Equal Opportunity Employer. We welcome talent of all backgrounds, experiences, and identities, including race, gender, age, disability, veteran status and more.</p><br><p>Need accommodation? Just let us know - we’ve got you.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Job Description<br><br><p><strong>Job Description</strong></p><br><p><strong>Job Title:</strong> Engineer-Warehouse</p><br><p><strong>Entity\Location:</strong></p><br><p><strong>Department:</strong> Warehouse &amp; Logistics, SCM</p><br><p><strong>Hierarchical Manager(s) Title(s)</strong></p><br><p><strong>Functional Manager(s) Title(s) </strong></p><br><p><strong>Mission</strong></p><br><p><strong>Key missions of the position: </strong></p><br><ul><li>Ensure efficient <strong>store operations</strong> including receipt, storage, and issue of materials to support production schedules.</li><li>Maintain accurate <strong>inventory records and stock visibility</strong> for internal stakeholders.</li><li>Ensure proper <strong>material handling, storage practices, and compliance with standards (5S/TPM/TQM)</strong>.</li></ul><p><strong>Measurement</strong></p><br><p><strong>Q (Quality):</strong></p><br><ul><li>Inventory accuracy and record maintenance</li><li>Compliance with 5S / TPM / audit standards</li></ul><p><strong>C (Cost):</strong></p><br><ul><li>Avoidance of material damage / deterioration</li><li>Proper handling of rejected / excess materials</li></ul><p><strong>D (Delivery):</strong></p><br><ul><li>Timely material issue to production</li><li>Availability of materials as per production schedule</li></ul><p><strong>Additional KPIs:</strong></p><br><ul><li>Completion of stock verification (perpetual &amp; annual)</li><li>Timely updation of ERP transactions</li></ul><p><strong>Main responsibilities:</strong></p><br><p><strong>Store Operations Management</strong></p><br><ul><li>Manage component store including <strong>receiving, safekeeping, accounting, and issuing materials</strong>.</li><li>Ensure materials are available to meet <strong>monthly production schedules</strong></li></ul><p><strong>Inventory Control &amp; Monitoring</strong></p><br><ul><li>Maintain accurate inventory records and provide <strong>timely inventory status</strong> to users.</li><li>Conduct <strong>perpetual inventory and annual stock verification</strong>, including reconciliation.</li><li>Monitor inventory levels and provide alerts to SCM for necessary actions.</li></ul><p><strong>Material Handling &amp; Storage</strong></p><br><ul><li>Ensure proper storage practices to avoid <strong>damage or deterioration of materials</strong>.</li><li>Maintain shelf-life items as per defined work instructions.</li><li>Identify and manage <strong>rejected materials (return/storage/disposal)</strong></li></ul><p><strong>System &amp; Documentation</strong></p><br><ul><li>Update all store transactions in <strong>ERP systems (Oracle)</strong> on real-time basis.</li><li>Maintain proper documentation for all store transactions.</li></ul><p><strong>Dispatch &amp; Coordination</strong></p><br><ul><li>Dispatch materials to subcontractors after proper <strong>verification of documents and materials</strong>.</li><li>Coordinate with Purchase, Quality, and other departments for store-related activities.</li></ul><p><strong>Compliance &amp; Housekeeping</strong></p><br><ul><li>Ensure compliance with <strong>5S / TQM / TPM / EMS standards</strong>.</li><li>Maintain good housekeeping and safe working practices in stores.</li></ul><p><strong>Support &amp; Additional Responsibilities</strong></p><br><ul><li>Assist Store Manager in overall store operations.</li><li>Handle any additional responsibilities assigned from time to time.</li></ul><p>People Management: YES __&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; NO ¨</p><br><p>If People Management, how many employees are managed? &nbsp;</p><br><p>Number of people&nbsp;:</p><br><p>Budget Management:&nbsp; YES ¨&nbsp; NO __</p><br><p><strong>Required Candidate Profile</strong></p><br><p><strong>Education/Training</strong></p><br><ul><li><em>B.Com / B.A / Diploma in Supply Chain Management</em>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul><p><strong>Professional Experience</strong></p><br><ul><li>Minimum 6 years of experience in <strong>stores / warehouse operations</strong></li></ul><p><strong>Key Competences (Transversal/Professional)</strong></p><br><p><strong>Competency</strong></p><br><p><strong>Level</strong></p><br><p>Material Handling, Storage &amp; Line Feeding <strong>4</strong></p><br><p>Inventory &amp; Warehouse Control <strong>3</strong></p><br><p>Supply Chain &amp; Operations Management <strong>3</strong></p><br><p>Digital &amp; Systems Capability <strong>2</strong></p><br><p>People / Stakeholder Management <strong>2</strong></p><br><p>Presentation &amp; Communication Skills <strong>2</strong></p><br><p><strong>Languages</strong></p><br><ul><li>English (Preferred)</li><li>Hindi</li></ul><p><strong>Other Specifications</strong></p><br><p><strong>Behavioural and Skills</strong></p><br><ul><li>Good understanding of <strong>store operations and inventory processes</strong></li><li>Ability to handle <strong>store manpower and coordination activities</strong></li><li>Basic knowledge of <strong>ERP systems and documentation</strong></li><li>Strong focus on <strong>discipline, accuracy, and compliance</strong></li></ul><br>Additional Information<br><br><p><strong>What could you accomplish in a place that puts People First?</strong></p><br><p>At Wabtec, it’s not just about a job - it’s about the impact you make. When our people come together, we’re Expanding the Possible by continuously improving what we do and how we do it - for our clients and each other.</p><br><p>If you’re ready to revolutionize how the world moves for future generations, Wabtec is the place for you.<br>&nbsp;</p><br><p><strong>Who are we?</strong></p><br><p>Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services for the freight and transit rail sectors. Drawing on more than 150 years of experience, we are leading the way in safety, efficiency, reliability, innovation, and productivity. Whether it’s freight, transit, ports, logistics, mining, industrial, or marine, our expertise, technologies, and people together – are accelerating the future of transportation. With roots that date back to George Westinghouse, Thomas Edison, and Louis Faiveley, Wabtec has always built technologies and implemented solutions for a variety of sectors that are critical to meeting the needs of customers and governments alike.</p><br><p>Our global team of about 30,000 employees worldwide delivers performance that moves the world forward. We’re lifelong learners, obsessed with better. Learn more at www.WabtecCorp.com.</p><br><p><strong>Culture powers us and the possibilities.</strong></p><br><p>We believe the best ideas come from a mix of experiences and backgrounds. At Wabtec, we strive every day to create a place where everyone belongs. We’re building a culture where leadership, inclusion and your unique perspective fuel progress.</p><br><p><br>We’re proud to be an Equal Opportunity Employer. We welcome talent of all backgrounds, experiences, and identities, including race, gender, age, disability, veteran status and more.</p><br><p>Need accommodation? Just let us know - we’ve got you.</p><br> </div>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analyze customer or internal specifications to define tooling requirements. Design manufacturing, inspection, and assembly tooling (molds, jigs, fixtures, machining tools, etc.) adapted to the products. Perform CAD studies and update the associated drawings. Participate in the technical selection of materials and processes for tooling, in line with product constraints. Write technical documentation (technical specifications, bills of materials, user manuals). Interact with suppliers and subcontractors to monitor tooling manufacturing. Ensure the monitoring of tooling commissioning in production (testing, fine-tuning, validation). Propose improvements or optimizations to existing tooling. Actively participate in design reviews and multidisciplinary discussions with project teams. Using the CATIA CPD module, perform composite part manufacturing work for new programs or modify existing work.</font></font></p><p><strong>Desired Candidate Profile</strong></p><h2>Job Requirements</h2> <p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Experience in a similar role, ideally in the aerospace or composite materials sector. Proficiency in CAD software (CATIA V5 preferred). Knowledge of machining and tooling manufacturing processes.</font></font></p> <h2>But what else? (advantages, specific features, etc.)</h2> <ul> <li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Autonomy</font></font></li> <li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Rigor</font></font></li> <li>Organisation</li> <li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Adaptability</font></font></li> <li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Team spirit</font></font></li> <li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Proactivity</font></font></li> </ul>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design, validate, and develop manufacturing and inspection documentation (routings, instruction sheets, bills of materials, equipment lists). Manage process modifications and ensure technical and documentary compliance. Analyze performance gaps and propose corrective and preventive action plans. Participate in risk analyses (FMEA, MFT, etc.) and the implementation of new processes. Contribute to the qualification and requalification of special processes. Ensure the industrialization/production handover and maintain operational readiness. Lead or co-lead Lean projects (VSM, 5S, SMED, line setup, visual management, etc.). Identify and prioritize areas for improvement on production lines. Contribute to a culture of continuous improvement and support the team in implementing actions. Monitor performance indicators (OEE, scrap, non-quality, cycle time). Define production resource requirements (machines, jigs, tooling, etc.) and validate their technical compliance: Manage their commissioning, validation, and obsolescence. Coordinate technical training for operators on their use. Participate in the design or adaptation of workstations (ergonomics, safety, workflow).&nbsp;</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analytical, synthesis, and structuring skills; </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">cross-functional project management (project leadership); </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">results and objectives orientation </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">; meeting facilitation techniques</font></font></p>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design, validate, and develop manufacturing and inspection documentation (routings, instruction sheets, bills of materials, allocations). Manage process modifications and ensure technical and documentary compliance. Analyze performance gaps and propose corrective and preventive action plans. Participate in risk analyses (FMEA, MFT, etc.) and the implementation of new processes. Contribute to the qualification and requalification of special processes. Ensure the industrialization/production handover and maintain operational readiness. Lead or co-lead Lean projects (VSM, 5S, SMED, line setup, visual management, etc.). Identify and prioritize areas for improvement on production lines. Contribute to a culture of continuous improvement and support technicians in implementing actions. Monitor performance indicators (OEE, scrap, non-quality, cycle time). Define production resource requirements (machines, jigs, tooling, etc.) and validate their technical conformity. Manage their commissioning, validation, and obsolescence. Coordinate technical training for operators and technicians on their use. Participate in the design or adaptation of workstations (ergonomics, safety, workflow).&nbsp;</font></font></p><p><strong>Desired Candidate Profile</strong></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analytical, synthesis and structuring skills</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Interpersonal communication</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Cross-functional project management (steering)</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Results orientation</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Group animation</font></font></li></ul>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design, validate, and develop manufacturing and inspection documentation (routings, instruction sheets, bills of materials, allocations). Manage process modifications and ensure technical and documentary compliance. Analyze performance gaps and propose corrective and preventive action plans. Participate in risk analyses (FMEA, MFT, etc.) and the implementation of new processes. Contribute to the qualification and requalification of special processes. Ensure the industrialization/production handover and maintain operational readiness. Lead or co-lead Lean projects (VSM, 5S, SMED, line setup, visual management, etc.). Identify and prioritize areas for improvement on production lines. Contribute to a culture of continuous improvement and support technicians in implementing actions. Monitor performance indicators (OEE, scrap, non-quality, cycle time). Define production resource requirements (machines, jigs, tooling, etc.) and validate their technical conformity. Manage their commissioning, validation, and obsolescence. Coordinate technical training for operators and technicians on their use. Participate in the design or adaptation of workstations (ergonomics, safety, workflow).</font></font></p><p><strong>Desired Candidate Profile</strong></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analytical, synthesis and structuring skills</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Interpersonal communication</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Cross-functional project management (steering)</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Results orientation</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Group animation</font></font></li></ul>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design, validate, and develop manufacturing and inspection documentation (routings, instruction sheets, bills of materials, allocations). Manage process modifications and ensure technical and documentary compliance. Analyze performance gaps and propose corrective and preventive action plans. Participate in risk analyses (FMEA, MFT, etc.) and the implementation of new processes. Contribute to the qualification and requalification of special processes. Ensure the industrialization/production handover and maintain operational readiness. Lead or co-lead Lean projects (VSM, 5S, SMED, line setup, visual management, etc.). Identify and prioritize areas for improvement on production lines. Contribute to a culture of continuous improvement and support technicians in implementing actions. Monitor performance indicators (OEE, scrap, non-quality, cycle time). Define production resource requirements (machines, jigs, tooling, etc.) and validate their technical conformity. Manage their commissioning, validation, and obsolescence. Coordinate technical training for operators and technicians on their use. Participate in the design or adaptation of workstations (ergonomics, safety, workflow).</font></font></p><p><strong>Desired Candidate Profile</strong></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analytical, synthesis and structuring skills</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Interpersonal communication</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Cross-functional project management (steering)</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Results orientation</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Group animation</font></font></li></ul>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design, validate, and develop manufacturing and inspection documentation (routings, instruction sheets, bills of materials, allocations). Manage process modifications and ensure technical and documentary compliance. Analyze performance gaps and propose corrective and preventive action plans. Participate in risk analyses (FMEA, MFT, etc.) and the implementation of new processes. Contribute to the qualification and requalification of special processes. Ensure the industrialization/production handover and maintain operational readiness. Lead or co-lead Lean projects (VSM, 5S, SMED, line setup, visual management, etc.). Identify and prioritize areas for improvement on production lines. Contribute to a culture of continuous improvement and support technicians in implementing actions. Monitor performance indicators (OEE, scrap, non-quality, cycle time). Define production resource requirements (machines, jigs, tooling, etc.) and validate their technical conformity. Manage their commissioning, validation, and obsolescence. Coordinate technical training for operators and technicians on their use. Participate in the design or adaptation of workstations (ergonomics, safety, workflow).&nbsp;</font></font></p><p><strong>Desired Candidate Profile</strong></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analytical, synthesis and structuring skills</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Interpersonal communication</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Cross-functional project management (steering)</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Results orientation</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Group animation</font></font></li></ul>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design, validate, and develop manufacturing and inspection documentation (routings, instruction sheets, bills of materials, allocations). Manage process modifications and ensure technical and documentary compliance. Analyze performance gaps and propose corrective and preventive action plans. Participate in risk analyses (FMEA, MFT, etc.) and the implementation of new processes. Contribute to the qualification and requalification of special processes. Ensure the industrialization/production handover and maintain operational readiness. Lead or co-lead Lean projects (VSM, 5S, SMED, line setup, visual management, etc.). Identify and prioritize areas for improvement on production lines. Contribute to a culture of continuous improvement and support technicians in implementing actions. Monitor performance indicators (OEE, scrap, non-quality, cycle time). Define production resource requirements (machines, jigs, tooling, etc.) and validate their technical conformity. Manage their commissioning, validation, and obsolescence. Coordinate technical training for operators and technicians on their use. Participate in the design or adaptation of workstations (ergonomics, safety, workflow).</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analytical, synthesis, and structuring skills; interpersonal communication; cross-functional project management (leadership); results-oriented; group facilitation</font></font></p>

<p>Participate in Risk Analysis and classify the criticality of industrialization. Participate in the analysis of product manufacturability and inspectability. Participate in the development of the industrialization plan. Participate in process risk analysis (e.g., process FMEA). Draft manufacturing, inspection, assembly, and test procedures. Draft acceptance test procedures. Implement production bills of materials in the ERP. Draft workstation documentation, product packaging, and preservation specifications. Complete the DVI-PPAP form with all necessary elements for establishing the surveillance plan. Carry out planned actions to mitigate identified risks. Actively assist in the manufacturing of the first products under conditions representative of series production. Support production teams to master the product/process combination. Ensure feedback on initial manufacturing regarding product definition, manufacturing process, and production means. Participate in the assessment of series production readiness. Assist in the manufacturing and control of FAI products. Consolidate data from pre-capability studies (in conjunction with DEV Quality if applicable). Participate in the review of process risk analysis (e.g., process FMEA). Contribute to the action plan to resolve non-conformities identified during the manufacturing and control of FAI products. Participate in project progress monitoring routines with the industrialization project team (e.g., Visual Planning, OBEYA). Participate, if necessary, in technical analyses and expert opinions related to product and/or process issues.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Autonomy and decision-making</li><li>Ability to convince</li><li>Analytical, synthesis, and structuring skills</li><li>Interpersonal communication</li><li>Conflict management</li><li>Budget management and control</li></ul>

<p>Result of Service -Safe and timely transportation services provided throughout the contract period. -Official vehicles maintained in good operational condition. -Vehicle logbooks, mileage and fuel consumption records completed accurately. -Timely reporting of maintenance needs and coordination of servicing. -Efficient logistical support provided to OHCHR activities, meetings and field missions. -Compliance with all applicable United Nations safety and security procedures.</p><p><br></p><p>Duties and Responsibilities</p><p>Under the direct supervision of the Representative in Tunisia or her designated supervisor, the Driver shall:</p><ul><li>Provide safe and reliable transportation for OHCHR Representative, staff members, consultants and experts on mission.</li><li>Drive official vehicles for missions within Tunis and throughout Tunisia.</li><li>Meet official visitors at airports and facilitate transportation arrangements.</li><li>Ensure strict compliance with United Nations road safety and security procedures.</li><li>Maintain the assigned vehicles in clean and good operating condition.</li><li>Carry out routine vehicle inspections, including checking oil, coolant, brake fluid, tyres, battery and general mechanical condition.</li><li>Arrange for routine servicing and report any mechanical defects promptly.</li><li>Maintain accurate vehicle logbooks, fuel consumption records and maintenance records.</li><li>Deliver and collect official mail, documents and small equipment.</li><li>Provide logistical support for meetings, workshops, conferences and field missions.</li><li>Ensure that vehicle registration, insurance and inspection documents remain valid.</li><li>Maintain confidentiality regarding all official information acquired during the course of duty.</li><li>Perform any other related duties assigned by the Representative or designated supervisor.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma or equivalent.</li><li>Valid driver's licence.</li><li>A minimum of two (2) years of professional driving experience.</li><li>Experience working with the United Nations, an international organization, diplomatic mission or NGO is desirable.</li><li>Excellent knowledge of the road network throughout Tunisia.</li><li>Experience in defensive driving and transporting senior officials is an asset.</li><li>Basic knowledge of Microsoft Office applications (Outlook and Word).</li><li>Ability to use GPS and navigation applications.</li><li>Good knowledge of vehicle maintenance procedures.</li><li>Fluency in Arabic and French, both oral and written, is required.</li><li>Working knowledge of English is desirable.</li><li>Comply with all United Nations regulations, rules and security procedures.</li><li>Maintain a valid driving licence throughout the duration of the contract.</li><li>Working hours may require flexibility depending on operational needs, including occasional travel outside Tunis.</li><li>Observe the highest standards of integrity, professionalism and confidentiality while performing the assignment.</li></ul>

<p>We are currently looking for an Order Entry Auditor to ensure that all requirements are met before orders reach our customers. You will be responsible for inspecting procedures and outputs, identifying mistakes or non-compliance issues. As an Order Entry Auditor, you will have a highly analytical mind with strong focus on attention to details. Primary responsibilities Understand and apply QA standards and methodologies throughout the order entry process. Perform thorough audits following defined protocols to ensure accuracy and efficiency. Identify deviations or shortfalls during the pre-production phase. Verify that order meets customer requirements and that product details are free of discrepancies. Maintain accurate records of audit findings, corrective actions, and follow-ups. Escalate urgent matters to supervisors/managers for timely resolution. Prepare and present reports, dashboards, and charts summarizing QA performance. Investigate quality issues and collaborate with relevant teams to resolve them. Provide recommendations for continuous improvement in QA practices. Ensure QA procedures and SOPs are regularly updated and in line with process changes. Share weekly and monthly findings with relevant departments and support the implementation of corrective and preventive actions. Collaborate closely with cross-functional teams including Order Entry, Graphics, and Customer Support to ensure alignment and continuous improvement. Discuss QA issues and solutions with supervisors when needed. Create and update training materials and guidelines to maintain quality standards. Develop and implement procedures to manage and improve QA processes. Support the team in achieving departmental objectives and goals. Growth &amp; Career Opportunities At Pens.com, we strongly believe in internal development and mobility. Many of our team members grow within the organization through internal opportunities and promotions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Fluent in English; knowledge of another European language (e.g., Spanish, Italian, German) is an advantage.</li><li>Strong ability to work under pressure and manage multiple tasks to meet tight deadlines.</li><li>Excellent verbal and written communication skills for clear interaction with various stakeholders.</li><li>Sharp attention to detail.</li><li>Previous experience in a Quality Control or Inspection role is preferred.</li><li>Familiarity with Quality Assurance methodologies (e.g., Lean, Six Sigma) is a plus.</li><li>Team-oriented with strong organizational and prioritization abilities.</li><li>Proficient in Microsoft Office tools, including Excel, Word, PowerPoint, and Outlook, for documentation, analysis, and reporting purposes.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>College Intern Technical Support - French Speaker</p><br><br><br><br>This role has been designed as 'Hybrid' with a requirement that you will work on average 2 days per week from an HPE office.<br><br><p><b>Who We Are:</b></p><br><br><p>Hewlett Packard Enterprise is the global edge-to-cloud company advancing the way people live and work. We help companies connect, protect, analyze, and act on their data and applications wherever they live, from edge to cloud, so they can turn insights into outcomes at the speed required to thrive in today’s complex world.&nbsp;Our culture thrives on&nbsp;finding new and better ways to accelerate what’s next.&nbsp;We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs.&nbsp;We make bold moves, together, and are a force for good. If you are looking to stretch and grow your career our culture will embrace you.&nbsp;Open up opportunities with HPE.</p><br><br><br><br><p><b>Job Description:</b></p><br><br><br><p><b>HPE University Hiring Program</b></p><br><br><br><p><b>Are you ready to give your career the boost it deserves?</b></p><br><br><p>College Intern - Technical Support </p><br><br><p>As a College Intern Technical Support Engineer, you will build practical experience supporting enterprise technology environments. You will work with experienced engineers, learn HPE support methodologies and tools, contribute to technical investigations, and help create a consistent, high-quality customer experience.</p><br><br><br><p><b>Job Responsibilities:</b></p><br><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assess and troubleshoot customer technical issues across supported infrastructure and software domains under the guidance of experienced engineers.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Demonstrate ownership by maintaining clear case documentation, progressing agreed actions, and communicating status accurately and professionally.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Collaborate with Front-End Engineers, Back-End Engineers, Expert Center teams, product engineering, partners, and other stakeholders to accelerate resolution.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Use established diagnostic methods, knowledge resources, support tools, automation, and approved AI capabilities to improve investigation quality and efficiency.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Collect and analyze logs, reproduce issues where appropriate, validate solutions, and contribute to technical action plans.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Create and improve reusable knowledge by documenting findings, solutions, lessons learned, and recurring issue patterns.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Follow HPE quality, security, privacy, compliance, and escalation processes while protecting customer and company information.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in learning plans, technical readiness activities, certifications, team initiatives, and continuous-improvement projects.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Support a global customer base and collaborate across time zones, including scheduled coverage when required by the business.</p><br><br><br><p><b>Technical areas:</b></p><br><br><br><p><span><b>Core infrastructure</b></span></p><br><br><p>Servers, storage, operating systems, networking, virtualization, databases, backup and recovery.</p><br><br><p><span><b>Hybrid cloud and platforms</b></span></p><br><br><p>Private and public cloud, containers, infrastructure automation, platform operations, and security fundamentals.</p><br><br><p><span><b>Emerging technologies</b></span></p><br><br><p>AI and data concepts, observability, automation, and modern HPE technology platforms relevant to the assigned team.</p><br><br><br><br><p><b>Prerequisites:</b></p><br><br><p>- Excellent Communication Skills</p><br><br><p>- French and English are required (written and spoken). Knowledge of additional languages, such as Spanish or Italian, is a plus.</p><br><br><p>- Passion to learn and act quickly, with a flair for technology and latest developments</p><br><br><p>- Strong problem-solving skills, with the ability to work in a fast-paced environment and manage multiple tasks</p><br><br><p>- Flexible to work across time zones</p><br><br><br><br><p><b>Accessibility</b></p><br><br><p>HPE is committed to creating an inclusive and accessible workplace and encourages applications from all qualified individuals, including those with disabilities. If you believe you require accommodation during any stage of the application or interview process, please submit your request by completing our secure form linked here.</p><br><br><p><span>Note: This option is reserved for applicants needing assistance/reasonable accommodation related to a disability.</span></p><br><br><br><br><p><b>What We Can Offer You:</b></p><br><br><p><b>Health &amp; Wellbeing</b></p><br><br><p>We strive to provide our team members and their loved ones with a comprehensive suite of benefits that supports their physical, financial and emotional wellbeing.</p><br><br><br><p><b>Personal &amp; Professional Development</b></p><br><br><p>We also invest in your career because the better you are, the better we all are. We have specific programs catered to helping you reach any career goals you have — whether you want to become a knowledge expert in your field or apply your skills to another division.</p><br><br><br><p><b>Unconditional Inclusion</b></p><br><br><p>We are unconditionally inclusive in the way we work and celebrate individual uniqueness. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good.</p><br><br><br><br><p><b>Let's Stay Connected:</b></p><br><br><p><span>Follow @HPECareers on Instagram to see the latest on people, culture and tech at HPE. </span></p><br><br><br><br>#tunisia#interns<br><br><p><b>Job:</b></p><br><br>Administration<p><b>Job Level:</b></p><br><br>N/A<br><br><p><span>HPE is an Equal Employment Opportunity/ <span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span>Veterans/Disabled/LGBT</span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span> employer. We do not discriminate </span><span>on the basis of race, gender, or any other protected category,</span> <span>and all decisions we make are made on the basis of qualifications, merit, and business need. Our goal is to be one global team that is representative of our customers, in an inclusive environment where we can continue to innovate and grow together. Please click here: </span>Equal Employment Opportunity<span>.</span></p><br><br><p><b><span>Hewlett Packard Enterprise is EEO Protected Veteran/ Individual with Disabilities.</span></b></p><br><br><br><p><span>HPE will comply with all applicable laws related to employer use of arrest and conviction records, including laws requiring employers to consider for employment qualified applicants with criminal histories.</span></p><br><br><br><p><b>Recruitment Fraud Alert</b></p><br><br><br><p>We have become aware of an increase in fraudulent recruitment activities in which individuals impersonate our company or authorized recruitment agencies to offer fake employment opportunities. These scams may occur through false websites, emails, social media, or chat-based applications and often aim to obtain personal information or money. Please note that Hewlett Packard Enterprise (HPE), its direct and indirect subsidiaries and affiliated companies, and its authorized recruitment agencies/vendors will never charge a candidate a registration fee, hiring fee, or any other fee in connection with its recruitment and hiring process. We also never request personal information such as back account details, Social Security numbers, or national IDs via social media or chat applications.</p><br><br><br><p>All legitimate job opportunities will come through official company channels, and candidates are responsible for verifying the credentials of any third party claiming to represent the company. Any reliance on fraudulent communication is at the individual’s own risk, and HPE disclaims legal liability for any resulting damages. If you suspect recruitment fraud, do not share personal information or make any payments and report the incident to your local authorities immediately.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>College Intern Technical Support - English Speaker</p><br><br><br><br>This role has been designed as 'Hybrid' with a requirement that you will work on average 2 days per week from an HPE office.<br><br><p><b>Who We Are:</b></p><br><br><p>Hewlett Packard Enterprise is the global edge-to-cloud company advancing the way people live and work. We help companies connect, protect, analyze, and act on their data and applications wherever they live, from edge to cloud, so they can turn insights into outcomes at the speed required to thrive in today’s complex world.&nbsp;Our culture thrives on&nbsp;finding new and better ways to accelerate what’s next.&nbsp;We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs.&nbsp;We make bold moves, together, and are a force for good. If you are looking to stretch and grow your career our culture will embrace you.&nbsp;Open up opportunities with HPE.</p><br><br><br><br><p><b>Job Description:</b></p><br><br><br><p><b>HPE University Hiring Program</b></p><br><br><br><p><b>Are you ready to give your career the boost it deserves?</b></p><br><br><br><p>College Intern – Technical Support</p><br><br><br><p>As a College Intern Technical Support Engineer, you will build practical experience supporting enterprise technology environments. You will work with experienced engineers, learn HPE support methodologies and tools, contribute to technical investigations, and help create a consistent, high-quality customer experience.</p><br><br><br><p><b>Job Responsibilities:</b></p><br><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assess and troubleshoot customer technical issues across supported infrastructure and software domains under the guidance of experienced engineers.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Demonstrate ownership by maintaining clear case documentation, progressing agreed actions, and communicating status accurately and professionally.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Collaborate with Front-End Engineers, Back-End Engineers, Expert Center teams, product engineering, partners, and other stakeholders to accelerate resolution.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Use established diagnostic methods, knowledge resources, support tools, automation, and approved AI capabilities to improve investigation quality and efficiency.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Collect and analyze logs, reproduce issues where appropriate, validate solutions, and contribute to technical action plans.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Create and improve reusable knowledge by documenting findings, solutions, lessons learned, and recurring issue patterns.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Follow HPE quality, security, privacy, compliance, and escalation processes while protecting customer and company information.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in learning plans, technical readiness activities, certifications, team initiatives, and continuous-improvement projects.</p><br><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Support a global customer base and collaborate across time zones, including scheduled coverage when required by the business.</p><br><br><br><p><b>Technical areas:</b></p><br><br><br><p><span><span><b>Core infrastructure</b></span></span></p><br><br><p><span>Servers, storage, operating systems, networking, virtualization, databases, backup and recovery.</span></p><br><br><p><span><span><b>Hybrid cloud and platforms</b></span></span></p><br><br><p><span>Private and public cloud, containers, infrastructure automation, platform operations, and security fundamentals.</span></p><br><br><p><span><span><b>Emerging technologies</b></span></span></p><br><br><p><span>AI and data concepts, observability, automation, and modern HPE technology platforms relevant to the assigned team.</span></p><br><br><br><br><p><b>Prerequisites:</b></p><br><br><p>- Excellent Communication Skills</p><br><br><p>- Fluency in either Italian, French, or Spanish (Speaking and Writing); <u>English is mandatory</u></p><br><br><p>- Passion to learn and act quickly, with a flair for technology and latest developments</p><br><br><p>- Strong problem-solving skills, with the ability to work in a fast-paced environment and manage multiple tasks</p><br><br><p>- Flexible to work across time zones</p><br><br><br><br><p><b>Accessibility</b></p><br><br><p>HPE is committed to creating an inclusive and accessible workplace and encourages applications from all qualified individuals, including those with disabilities. If you believe you require accommodation during any stage of the application or interview process, please submit your request by completing our secure form linked here.</p><br><br><p><span>Note: This option is reserved for applicants needing assistance/reasonable accommodation related to a disability.</span></p><br><br><br><br><p><b>What We Can Offer You:</b></p><br><br><p><b>Health &amp; Wellbeing</b></p><br><br><p>We strive to provide our team members and their loved ones with a comprehensive suite of benefits that supports their physical, financial and emotional wellbeing.</p><br><br><br><p><b>Personal &amp; Professional Development</b></p><br><br><p>We also invest in your career because the better you are, the better we all are. We have specific programs catered to helping you reach any career goals you have — whether you want to become a knowledge expert in your field or apply your skills to another division.</p><br><br><br><p><b>Unconditional Inclusion</b></p><br><br><p>We are unconditionally inclusive in the way we work and celebrate individual uniqueness. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good.</p><br><br><br><br><p><b>Let's Stay Connected:</b></p><br><br><p><span>Follow @HPECareers on Instagram to see the latest on people, culture and tech at HPE. </span></p><br><br><br><br>#tunisia#interns<br><br><p><b>Job:</b></p><br><br>Administration<p><b>Job Level:</b></p><br><br>N/A<br><br><p><span>HPE is an Equal Employment Opportunity/ <span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span><span>Veterans/Disabled/LGBT</span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span></span> employer. We do not discriminate </span><span>on the basis of race, gender, or any other protected category,</span> <span>and all decisions we make are made on the basis of qualifications, merit, and business need. Our goal is to be one global team that is representative of our customers, in an inclusive environment where we can continue to innovate and grow together. Please click here: </span>Equal Employment Opportunity<span>.</span></p><br><br><p><b><span>Hewlett Packard Enterprise is EEO Protected Veteran/ Individual with Disabilities.</span></b></p><br><br><br><p><span>HPE will comply with all applicable laws related to employer use of arrest and conviction records, including laws requiring employers to consider for employment qualified applicants with criminal histories.</span></p><br><br><br><p><b>Recruitment Fraud Alert</b></p><br><br><br><p>We have become aware of an increase in fraudulent recruitment activities in which individuals impersonate our company or authorized recruitment agencies to offer fake employment opportunities. These scams may occur through false websites, emails, social media, or chat-based applications and often aim to obtain personal information or money. Please note that Hewlett Packard Enterprise (HPE), its direct and indirect subsidiaries and affiliated companies, and its authorized recruitment agencies/vendors will never charge a candidate a registration fee, hiring fee, or any other fee in connection with its recruitment and hiring process. We also never request personal information such as back account details, Social Security numbers, or national IDs via social media or chat applications.</p><br><br><br><p>All legitimate job opportunities will come through official company channels, and candidates are responsible for verifying the credentials of any third party claiming to represent the company. Any reliance on fraudulent communication is at the individual’s own risk, and HPE disclaims legal liability for any resulting damages. If you suspect recruitment fraud, do not share personal information or make any payments and report the incident to your local authorities immediately.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Result of Service<br>-Safe and timely transportation services provided throughout the contract period. -Official vehicles maintained in good operational condition. -Vehicle logbooks, mileage and fuel consumption records completed accurately. -Timely reporting of maintenance needs and coordination of servicing. -Efficient logistical support provided to OHCHR activities, meetings and field missions. -Compliance with all applicable United Nations safety and security procedures.<br> Work Location<br>Tunis, Tunisia<br> Expected duration<br>1 October 2026 to 1 October 2027<br> Duties and Responsibilities<br>Under the direct supervision of the Representative in Tunisia or her designated supervisor, the Driver shall: - Provide safe and reliable transportation for OHCHR Representative, staff members, consultants and experts on mission. -Drive official vehicles for missions within Tunis and throughout Tunisia. -Meet official visitors at airports and facilitate transportation arrangements. -Ensure strict compliance with United Nations road safety and security procedures. -Maintain the assigned vehicles in clean and good operating condition. -Carry out routine vehicle inspections, including checking oil, coolant, brake fluid, tyres, battery and general mechanical condition. -Arrange for routine servicing and report any mechanical defects promptly. -Maintain accurate vehicle logbooks, fuel consumption records and maintenance records. -Deliver and collect official mail, documents and small equipment. -Provide logistical support for meetings, workshops, conferences and field missions. -Ensure that vehicle registration, insurance and inspection documents remain valid. -Maintain confidentiality regarding all official information acquired during the course of duty. -Perform any other related duties assigned by the Representative or designated supervisor.<br> Qualifications/special skills<br>Education -High School Diploma or equivalent. -Valid driver's licence. Experience -A minimum of two (2) years of professional driving experience. -Experience working with the United Nations, an international organization, diplomatic mission or NGO is desirable. -Excellent knowledge of the road network throughout Tunisia. -Experience in defensive driving and transporting senior officials is an asset. Technical Skills -Basic knowledge of Microsoft Office applications (Outlook and Word). -Ability to use GPS and navigation applications. -Good knowledge of vehicle maintenance procedures.<br> Languages<br>Fluency in Arabic and French, both oral and written, is required. Working knowledge of English is desirable.<br> Additional Information<br>-Comply with all United Nations regulations, rules and security procedures. - Maintain a valid driving licence throughout the duration of the contract. -Working hours may require flexibility depending on operational needs, including occasional travel outside Tunis. -Observe the highest standards of integrity, professionalism and confidentiality while performing the assignment.<br> No Fee<br>THE UNITED NATIONS DOES NOT CHARGE A FEE AT ANY STAGE OF THE RECRUITMENT PROCESS (APPLICATION, INTERVIEW MEETING, PROCESSING, OR TRAINING). THE UNITED NATIONS DOES NOT CONCERN ITSELF WITH INFORMATION ON APPLICANTS’ BANK ACCOUNTS.<br><br><br> </div>