وظائف فني انتاج في تونس

<p><br></p><p>Job Description - Accomplishes specific tasks within the Assembly area, (e.g. representative not full list) - Performs all checks as defined in the Quality control plan and records the required data - Identifies non-conforming products with "red card" process - Distributes and collects PDEK or other control charts - Gives feedback to line and to WPA for all non-conformities found on the assembly line (e.g. electrical test, clip test, inspection points, care points, etc.) by using the stop at first defect process - Inspects 5S / housekeeping application within the area of responsibility - Identifies areas of product risk e.g. material on the floor, terminals damaged, bent within holders, stands, mixed components, etc. - Checks that operators are qualified to work on the station in line with the skills matrix - Checks adherence to OK to Start procedure at the start of each shift - Performs check of error proofing conformity within the assembly area (e.g. good/bad sample test release, poka- yoke, jigs, etc.) - Varifies that assembly aid tools are available and used in proper condition (e.g. convolute and corrugated tube aids, pvc tube aids, etc.) - Validates the completion of the packing process and conformity according to work instructions - Ensures that in-line and off-line reworks are performed by qualified operators with released tools and respecting rework procedures - Inspects if documentation in workstation according to control plan and internal standards is followed - Audits final harness inspection in accordance with the QM plan and or additional care points</p><p><strong>Desired Candidate Profile</strong></p><p>Education Level : Min BAC Language: English &amp; French Experience : 1 year LEONI Communication Social &amp; intercultural sensitivity Change management Target &amp; result orientation Motivation &amp; resilience Self-organization Conflict management Teamwork Interested? Apply now All jobs People of all genders are always meant equally; for linguistic simplification and better readability, only the masculine form is used in the text. LEONI processes your application data in an IT-system that is consistent across the company and uses Foreign Service providers. By sending your application, you agree to this procedure. LEONI ensures the compliance with data protection.</p>

<p>Carries out all activities related to the maintenance of a site - Performs maintenance or ensures maintenance of: - Buildings, cooling, heating, electricity, water, compressed air, steam, etc. as well as other installations - Firefighting and fire prevention equipment - Security camera systems in accordance with technical specifications, compliance standards and government regulations - Ensures the water and electricity supply of the property - Prepares and archives documents for archiving - Documented maintenance carried out according to the maintenance plan - Carries out removals and conversions - Inspects meeting rooms with regard to furniture and ensures the specified condition in cooperation with IT - Collects, documents and reports consumption data - Supports internal and external audits - Creates purchase requisitions and records the receipt of goods for services</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum education level : BTS (Industrial Maintenance, Mechanical, or equivalent).</li><li>Language : French &amp; English</li><li>Desired experience in an industrial environment (ideally in a production setting).</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job : <ul><li>Maintain equipment in good working order by following operating procedures and maintenance plans.</li><li>Perform preventive and corrective maintenance on equipment, respecting safety rules.</li><li>Detect the cause of breakdowns, establish a diagnosis by following logical and methodological processes.</li><li>Repair any failures as quickly as possible with precise analysis followed by a complete breakdown report.</li><li>Change or repair defective parts, components, and proceed with tests and adjustments.</li><li>Enter all activities into the CMMS to ensure optimal feedback and guarantee spare parts inventory management.</li><li>Perform readings and analysis of electrical diagrams and program PLCs.</li><li>Control the consumption of spare parts based on statistics.</li><li>Propose solutions to optimize the safety and performance of the production tool.</li><li>Provide technical support and share skills with the team to ensure the quality of interventions.</li><li>Stay constantly updated on technical developments.</li><li>Repair, prepare, and replace defective parts.</li></ul> <br> Required profile : <ul><li>Holder of a <strong>BTP</strong>, <strong>BTS</strong>, or <strong>License</strong> in industrial automation maintenance, mechanics, or electrical engineering, or with <strong>at least 5 years of experience</strong> in the industrial sector.</li><li>Knowledge of numerical controls and automated systems.</li><li>Knowledge of numerical controls and automated systems.</li><li>Knowledge of mechanics, hydraulics, and pneumatics would be a plus.</li><li>Rigorous, methodical, and attentive.</li></ul> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform remote installations of user environments and associated software for clients. Prepare and configure hardware and software for client workstations. Perform remote troubleshooting and provide technical support to resolve issues. Ensure the maintenance and updating of user environments to keep them in optimal condition. Respond to customer inquiries and provide advice on product usage. Collaborate with other departments to improve service delivery and the knowledge base. Ensure compliance with security protocols on client networks. Document installation processes and contribute to the improvement of procedures.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Mastery of French</p><p>Advanced technical knowledge, particularly concerning the management of Microsoft Azure environments and messaging technologies</p><p>Proven experience with remote installation software and tools</p><p>Strong troubleshooting and problem-solving skills</p><p>Excellent interpersonal and communication skills</p><p>Demonstrated organizational skills and attention to detail</p><p>Ability to work independently and manage time effectively</p><p>You are customer-oriented and committed to providing exceptional service.</p><p>Technical diploma in IT or a related field (preferred)</p><p>Relevant IT certifications (e.g., CompTIA A+, Microsoft Certified: Azure Administrator Associate) are a plus.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Mission</b>: Implementation of orders for new parts requested. Ensure compliance of measurements and transmit them for processing. Search for quotes from suppliers. Ensure order follow-up according to a 3-step process (order acknowledgment/compliance of delivery date monthly/shipment). Report difficulties: blockages, anomalies, lost parts, non-receipt, non-compliant delivery, technical problems. Maintain good relations with suppliers by attending regular meetings.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma Bac+3 in mechanical engineering, industrial methods, or logistics</li><li>Skills in process management and continuous improvement.</li><li>Good command of computer tools</li><li>Sense of organization, Autonomy, ability to share blocking points, synthesis skills</li><li>Team spirit and good communication skills.</li><li>Good command of French and English, both spoken and written.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<p><strong>LEONI </strong>is a global leading provider of products, solutions and services for energy and data management in the automotive industry. With around <strong>86,000 employees</strong> in <strong>21 countries</strong> and consolidated sales of EUR 3.9 billion in 2025 (excluding the former Automotive Cable Solutions division), we are a leading supplier of complex wiring systems and customer‑specific cable harnesses.</p><br><p><strong>Since 2025</strong>, we have been part of the <strong>Luxshare Group</strong>, a global technology company headquartered in China. Together, we are shaping the future of mobility. Join us and help drive the transformation of the automotive world.</p><br><br><br>Job Description<p>Manufactures assembly boards and test equipment used to build and test harness</p><br><p>- Performs activities for construction and modification of boards and test equipment used to build and test harness according to requirements and standards<br></p><br><p>- Performs planned autonomous maintenance on Board Design &amp; Preparation workshop equipment<br></p><br><p>- Ensures the correct usage of specific tools and materials required to perform the construction activities according to requirements and standards<br></p><br><p>- Ensures the creation and modification of required control and release documentation<br></p><br><p>- Suggests improvements for Board Design &amp; Preparation processes<br></p><br><p>- Selects materials for manufacturing of boards and test equipment<br></p><br><p>- Provides support for optimization of materials &amp; lay-outs<br></p><br><p>- Installs and releases process for boards and test equipment<br></p><br><p>- Implements Lessons Learned, best practice and actively shares the information within the Production Preparation Team</p><br><br><br>Qualifications and Experience<p>• Education Level : Min BTS<br></p><br><p>• Language: English &amp; French .<br></p><br><p>• Communication .<br></p><br><p>• Social &amp; intercultural sensitivity .<br></p><br><p>• Change management .<br></p><br><p>• Target &amp; result orientation .<br></p><br><p>• Motivation &amp; resilience .<br></p><br><p>• Self-organization .<br></p><br><p>• Conflict management .<br></p><br><p>• Teamwork .</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<p>LEONI is a global leading provider of products, solutions and services for energy and data management in the automotive industry. With around<strong>95,000 employees</strong> in <strong>23 countries</strong> and consolidated sales of EUR<strong> 3.9 billion in 2025 </strong>(excluding the former Automotive Cable Solutions division), we are a leading supplier of complex wiring systems and customer‑specific cable harnesses.</p><br><p>&nbsp;Since 2025, we have been part of the Luxshare Group, a global technology company headquartered in China. Together, we are shaping the future of mobility. Join us and help drive the transformation of the automotive world.</p><br><br><br>Job Description<p>- Releases the daily process in the Cutting Area<br></p><br><p>- Performs requalification of applicators according to internal procedure (AA3117), including ultrasonic welding combinations and splice volt drop resistance<br></p><br><p>- Ensures CMK, CPK and SPC studies for production equipment and processes<br></p><br><p>- Elaborates and evaluates micrographs, performs equipment calibration, and maintains document registry<br></p><br><p>- Validates requalification of manual applicators, cutting and crimping machines<br></p><br><p>- Performs requalification per process (cutting, stripping, crimping, welding, twisting, shrinking)<br></p><br><p>- Conducts microsections and supports analysis of customer or supplier complaint samples<br></p><br><p>- Performs additional tests related to quality, engineering, complaints, and machine commissioning<br></p><br><p>- Ensures compliance with all applicable quality standards, norms, and HSEE requirements in the area of activity<br></p><br><p>- Improves crimping qualification processes and laboratory usage, and elaborates micrograph catalogues for samples and product audits (e.g. customer specifics)</p><br><br><br>Qualifications and Experience<ul><li><strong>Level of Education :&nbsp;</strong>University degree</li><li><strong>Branch Of Study:</strong>&nbsp;all branchs&nbsp;</li><li><strong>Experience:&nbsp;</strong>3 year of experience Quality&nbsp;</li><li><strong>Social competences:</strong>&nbsp;Communication /Social &amp; intercultural sensitivity / Change management /Target &amp; resultorientation/ Motivation &amp; resilience /Self-organization /Conflict management / Teamwork</li><li><strong>Professional competences:</strong>&nbsp;Adult Learning Theory/Blended Learning/ELearning Concepts/Skills and Competency Modeling/Training Management /Leadership Development Programs</li></ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Result of Service<br>Upon satisfactory completion of the deliverables.<br> Work Location<br>Home-based<br> Expected duration<br>7 months<br> Duties and Responsibilities<br>Organizational Background UN-Habitat, the United Nations Human Settlements Programme, is mandated by the UN General Assembly to promote socially and environmentally sustainable towns and cities. It is the focal point for all urbanization and human settlement matters within the UN system. To achieve its 2026–2029 strategic plan through its three interconnected impact areas, UN-Habitat proposes policy and legislation as one of the main drivers of the theory of change. In addition to that, one of the most pressing issues in Tunisia today is the environmental and water management challenge. At the national level, in recent years, Sejnane has experienced several unpredictable events that have disrupted planning and required adaptive responses. Tunisia has faced significant climate variability, with 2023 recorded as the driest years in over a decade, according to the National Institute of Meteorology. Rainfall levels dropped to 60% below seasonal averages in some northern regions, including Bizerte Governorate, where Sejnane is located. This severe drought contributed to a national water crisis, with dam reservoirs falling below 30% capacity. In response, the Ministry of Agriculture implemented water rationing measures, restricting agricultural irrigation and limiting water access in both rural and urban areas. At the same time, institutional challenges affected the stability of infrastructure development. Government reshuffles between 2023 and 2024 disrupted public sector partnerships and delayed project approvals. Administrative turnover within national and local agencies created procedural bottlenecks affecting technical and financial clearances of infrastructure projects. These factors have made it difficult to accurately assess and respond to evolving challenges in the water, sanitation, and hygiene (WASH) sector in Sejnane. Within this context, the project “Sejnane in Action: Citizens and Municipality Together for Clean Water and Zero Waste” aims to support the municipality in identifying and implementing practical and sustainable technical solutions, including rainwater harvesting systems, to improve water availability and resilience. Reporting Line The Individual Contractor will work under the direct supervision of the Head of Office, UN-Habitat Tunisia, and will collaborate closely with: • Project team members • Municipality of Sejnane • Relevant national and local stakeholders Duties and Responsibilities The Individual Contractor will perform the following functions on a regular and ongoing basis as part of the project team: 1. Technical Design and Planning Support • Contribute to the preparation and refinement of workplans for rainwater harvesting activities • Provide technical inputs to the design of rainwater harvesting systems, including sizing, layout, and specifications • Support the preparation and review of Bills of Quantities (BoQ) and technical documentation 2. Implementation Support • Provide technical guidance during the implementation of rainwater harvesting systems • Support troubleshooting and adjustment of design based on site conditions • Participate in technical discussions related to construction and installation activities • Provide limited technical guidance during the initial operational phase, including early-stage troubleshooting and system adjustments, as required 3. Technical Advisory and Coordination • Provide ongoing technical advice to project team and stakeholders • Support coordination with municipal authorities and technical counterparts • Participate in meetings, workshops, and consultations as required 4. Capacity Building • Provide technical guidance and knowledge sharing to local stakeholders • Support training activities related to system installation, operation, and maintenance • Provide practical guidance to local stakeholders during the initial operation phase to support proper system use and basic troubleshooting 5. Knowledge Contribution and Reporting Support • Contribute technical inputs to project reports and documentation • Share lessons learned and practical recommendations based on implementation experience • Provide inputs related to initial system performance and operational challenges to inform project reporting and future interventions Note: UN-Habitat Tunisia Office will obtain the relevant data and reports from the local counterparts as much as possible and share them with the Individual Contractor.<br> Qualifications/special skills<br>Advanced university degree (master’s degree or equivalent) in engineering, environment or related field is required. A first-level university degree, combined with additional two years of relevant experience may be approved in lieu of the advanced university degree. A minimum of two years of progressive experience in the field of water management and environment is required. Knowledge of Japanese technologies on rainwater harvesting is an asset. Experience in the design, technical specification, and/or implementation support of decentralized or small-scale rainwater harvesting systems (such as rainwater harvesting systems for human consumption utilizing impermeable liner or similar technologies) at community level is considered a strong asset. Demonstrated experience in providing practical technical guidance across multiple project phases, including design, planning, and implementation, is desirable.<br> Languages<br>Fluency in spoken and written English is required. Knowledge of Japanese is desired.<br> Additional Information<br>Not available.<br> No Fee<br>THE UNITED NATIONS DOES NOT CHARGE A FEE AT ANY STAGE OF THE RECRUITMENT PROCESS (APPLICATION, INTERVIEW MEETING, PROCESSING, OR TRAINING). THE UNITED NATIONS DOES NOT CONCERN ITSELF WITH INFORMATION ON APPLICANTS’ BANK ACCOUNTS.<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Who are we?<br> SupportYourApp is a global Intelligent Support-as-a-Service leader, partnering with tech companies and industry leaders like MasterCard, Calm and MacPaw in 30+ countries since 2010 to deliver secure customer and technical support.<br> We operate globally, supporting clients in 60 languages across diverse industries.<br> So what if you had a chance to be a part of the world’s leading SaaS, software, or hardware solutions?<br> Join our community as a Technical Support Consultant today and thrive in a multicultural and multilingual environment while enjoying your home office.<br> Unlock your potential by mastering new skills and achieving challenging goals in cooperation with our People First management approach.<br> Excited? Let’s see what it takes.<br> What you will do: Deliver outstanding technical support via emails and video calls; Collaborate with internal teams to investigate and resolve customer issues efficiently; Represent the company by ensuring a positive customer experience throughout the issue resolution process; Develop strong product knowledge to provide accurate guidance and support; Assist customers with customized reports and analysis using data visualization tools; Monitor and troubleshoot connection issues using internal and external tools; Maintain detailed records of customer interactions, troubleshooting steps, and resolutions within the support ticketing system; Escalate complex technical issues to engineering teams when required to ensure timely resolution; Maintain deep understanding of client solutions and meet KPI.<br> What you need to succeed in this role: Excellent English skills (at least C1 for both spoken and written); 3-5 years of experience in customer and technical support role is a must; Proven knowledge of the payments ecosystem mechanisms; Ability to troubleshoot using databases &amp; other technical tools; Excellent customer-facing skills to ensure a positive customer experience; Strong analytical thinking and research skills; Ability to identify when an escalation to the Engineering team is required; Positive, proactive and responsible attitude; Personal computer (at least 8Gb of RAM) with a stable internet connection (minimum 45 Mbps–download and 20 Mbps–upload).<br> Will be a great plus: Experience with SQL \ Postman; Experience with MongoDB , Tableau, Snowflake; QA background.<br> Benefits: Fixed schedule: Monday–Friday, 10 AM - 6 PM GMT+3 Opportunity to cooperate fully remotely; Inclusive international environment; Compensation in USD; Rewards for referring friends; Balance between project workload and personal time, but also – internal health policy; Responsive leadership interested in your development and long-lasting cooperation; Greenhouse conditions for self-development; A culture built on trust, with no time-tracking requirements.<br> *The items listed in this section may vary depending on the terms of your engagement.<br> Certain benefits and conditions typically apply to employees; independent contractors may not be eligible for all of these.<br> The specific terms, including compensation, benefits, and work conditions, will be clearly defined in your agreement if selected.<br> You can learn more about the company and its culture by visiting our official website and social pages on Facebook, Instagram, and LinkedIn.<br> So if you're a proactive Support Specialist who thrives on solving problems, ensuring customer satisfaction, and delivering outstanding service, don't miss this opportunity and send us your CV in English to collaborate with us!<br> Over 1500+ specialists who already deliver exceptional customer experiences collaborating with SupportYourApp.<br> Know someone perfect for the role?<br> Refer them and get rewarded!<br> We adhere to the principles of equal treatment of candidates and prohibit discrimination on any grounds protected by law.<br> Your personal data will be processed as described in the SupportYourApp Candidate Privacy Notice .<br> Internal job code: 3F1</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> French Print Technical support representative<br><p><b>Description -</b></p><br><br><p><b>Who are we?</b></p><br><br><p>HP creates new possibilities for technology to have a meaningful impact on people, businesses, governments and society. The world’s largest technology company and ranked 10 on the Fortune 500 list for 2012, HP brings together a portfolio that spans printing, personal computing, software, services and IT infrastructure to serve more than 1 billion customers in over 170 countries on six continents.</p><br><br><p>HP invents, engineers, and delivers technology solutions that drive business value, create social value, and improve the lives of our clients. At HP, we know that our people and values are the most important elements in this success. And we want you to add your voice and imagination to our mission. Learn more http://www.hp.com/</p><br><br><br><p><b>Job Summary</b></p><br><br><p><br>• This role is responsible for resolving moderate to complex technical problems, providing comprehensive responses about services and products, and assisting customers proactively within Commercial Printing teams.</p><br><br><p>The role collaborates with various teams to ensure seamless project outcomes, maintains customer relationships, recommends improvements, and coordinates departmental work while fostering positive relationships within the organization. The role operates independently, using established protocols to address customer concerns with moderate judgment.<br><b>Responsibilities</b></p><br><br><p><br>• Operates independently, adhering to established protocols to address customer concerns, with a degree of moderate judgment to complement the outlined process.<br>• Resolves technical problems of moderate to complex nature, encompassing hardware and software through incoming customer interactions and proactive notification systems.<br>• Provides comprehensive responses to questions about services, products, technical matters, and customer relations, including features, specifications, and repairs, for both current and obsolete products, components, and options, in alignment with customer entitlement, such as warranties, enterprise agreements, and even mission-critical support.<br>• Assists customers proactively to mitigate or prevent the occurrence of problems, while also participating in initiatives aimed at enhancing processes or ensuring quality improvements.<br>• Works effectively with clients, programmers, QA testers, and managers to ensure seamless project outcomes.<br>• Establishes and maintains trusted relationships within customer accounts across the spectrum of technical users.<br>• Applies extensive knowledge, resolves complex issues, and recommends improvements through creative and effective approaches.<br>• Coordinates departmental work, mentors the team, and serves as an escalation point for different issues in the related area of work.<br>• Identifies opportunities for improvement, makes recommendations, and also assures effective business controls through review, analysis, and verification.<br>• Coordinates the functional work within the department, assists various departments, monitors process execution, and fosters positive working relationships with associates and management.<br><b><b>Education &amp; Experience</b> Recommended</b></p><br><br><p><br>• High School Diploma/General Education Diploma (GED)/Higher Secondary education or commensurate work experience or demonstrated competence.<br>• Typically, has more than 2 years of related work experience, preferably in remote support, telephone support, technologies and customer environments, or a related field.<br><b>Preferred Certifications</b><br>NA<br><b>Knowledge &amp; Skills</b><br>• Agile Methodology<br>• Automation<br>• Computer Hardware<br>• Computer Science</p><br><br><p>• Pring devices knowledge and expertise<br>• Help Desk Support<br>• Information Technology Infrastructure Library<br>• Issue Tracking<br>• IT Service Management<br>• Linux<br>• Microsoft Office 365<br>• Microsoft Windows 11<br>• Operating Systems<br>• Peripheral Devices<br>• Scripting<br>• ServiceNow<br>• Technical Support<br><b>Cross-Org Skills</b><br>• Effective Communication<br>• Results Orientation<br>• Learning Agility<br>• Digital Fluency<br>• Customer Centricity<br><b>Impact &amp; Scope</b><br>• Impacts department and leads and/or provides expertise to functional project teams and may participate in cross-functional initiatives.<br><b>Complexity</b><br>• Works on assignments that are complex in nature and require initiative and technical/specialized knowledge to resolve problems and/or develop recommended solutions.<br><b>Disclaimer</b><br>• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.</p><br><br><br><p><b>#LI-POST</b></p><br><br><br><p><b>Job -</b></p><br><br>Services<br><p><b>Schedule -</b></p><br><br>Full time<br><p><b>Shift -</b></p><br><br>No shift premium (Tunisia)<br><p><b>Travel -</b></p><br><br><br><p><b>Relocation -</b></p><br><br>No<p><b><span><span><span><span><span>Equal Opportunity Employer (EEO)</span></span></span></span></span> -&nbsp;</b></p><br><br><br><p>HP, Inc. provides equal employment opportunity to all employees and prospective employees, without regard to race, color, religion, sex, national origin, ancestry, citizenship, sexual orientation, age, disability, or status as a protected veteran, marital status, familial status, physical or mental disability, medical condition, pregnancy, genetic predisposition or carrier status, uniformed service status, political affiliation or any other characteristic protected by applicable national, federal, state, and local law(s).</p><br><br><br><p>Please be assured that you will not be subject to any adverse treatment if you choose to disclose the information requested. This information is provided voluntarily. The information obtained will be kept in strict confidence.</p><br><br><br><p>For more information, review HP’sEEO Policy or read about your rights as an applicant under the law here: “Know Your Rights: Workplace Discrimination is Illegal"</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Italian Print Technical support representative<br><p><b>Description -</b></p><br><br><p><b>Who are we?</b></p><br><br><p>HP creates new possibilities for technology to have a meaningful impact on people, businesses, governments and society. The world’s largest technology company and ranked 10 on the Fortune 500 list for 2012, HP brings together a portfolio that spans printing, personal computing, software, services and IT infrastructure to serve more than 1 billion customers in over 170 countries on six continents.</p><br><br><p>HP invents, engineers, and delivers technology solutions that drive business value, create social value, and improve the lives of our clients. At HP, we know that our people and values are the most important elements in this success. And we want you to add your voice and imagination to our mission. Learn more http://www.hp.com/</p><br><br><br><p><b>Job Summary</b></p><br><br><p><br>• This role is responsible for resolving moderate to complex technical problems, providing comprehensive responses about services and products, and assisting customers proactively within Printing Commercial teams.</p><br><br><br><p>The role collaborates with various teams to ensure seamless project outcomes, maintains customer relationships, recommends improvements, and coordinates departmental work while fostering positive relationships within the organization. The role operates independently, using established protocols to address customer concerns with moderate judgment.<br><b>Responsibilities</b></p><br><br><p><br>• Operates independently, adhering to established protocols to address customer concerns, with a degree of moderate judgment to complement the outlined process.<br>• Resolves technical problems of moderate to complex nature, encompassing hardware and software through incoming customer interactions and proactive notification systems.<br>• Provides comprehensive responses to questions about services, products, technical matters, and customer relations, including features, specifications, and repairs, for both current and obsolete products, components, and options, in alignment with customer entitlement, such as warranties, enterprise agreements, and even mission-critical support.<br>• Assists customers proactively to mitigate or prevent the occurrence of problems, while also participating in initiatives aimed at enhancing processes or ensuring quality improvements.<br>• Works effectively with clients, programmers, QA testers, and managers to ensure seamless project outcomes.<br>• Establishes and maintains trusted relationships within customer accounts across the spectrum of technical users.<br>• Applies extensive knowledge, resolves complex issues, and recommends improvements through creative and effective approaches.<br>• Coordinates departmental work, mentors the team, and serves as an escalation point for different issues in the related area of work.<br>• Identifies opportunities for improvement, makes recommendations, and also assures effective business controls through review, analysis, and verification.<br>• Coordinates the functional work within the department, assists various departments, monitors process execution, and fosters positive working relationships with associates and management.<br><b><b>Education &amp; Experience</b> Recommended</b></p><br><br><p><br>• High School Diploma/General Education Diploma (GED)/Higher Secondary education or commensurate work experience or demonstrated competence.<br>• Typically has 2 years of related work experience, preferably in remote support, telephone support, technologies and customer environments, or a related field.<br><b>Preferred Certifications</b><br>NA<br><b>Knowledge &amp; Skills</b></p><br><br><p>• Fluent in Italian with good English</p><br><br><p>• Agile Methodology<br>• Automation<br>• Computer Hardware<br>• Computer Science</p><br><br><p>• Printing knowledge<br>• Desktop Support<br>• Help Desk Support<br>• Information Technology Infrastructure Library<br>• Issue Tracking<br>• IT Service Management<br>• Linux<br>• Microsoft Office 365<br>• Microsoft Windows 11<br>• Operating Systems<br>• Peripheral Devices<br>• Scripting<br>• ServiceNow<br>• Technical Support<br>• Windows Servers<br><b>Cross-Org Skills</b><br>• Effective Communication<br>• Results Orientation<br>• Learning Agility<br>• Digital Fluency<br>• Customer Centricity<br><b>Impact &amp; Scope</b><br>• Impacts department and leads and/or provides expertise to functional project teams and may participate in cross-functional initiatives.<br><b>Complexity</b><br>• Works on assignments that are complex in nature and require initiative and technical/specialized knowledge to resolve problems and/or develop recommended solutions.<br><b>Disclaimer</b><br>• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.</p><br><br><br><p><b>Job -</b></p><br><br>Services<br><p><b>Schedule -</b></p><br><br>Full time<br><p><b>Shift -</b></p><br><br>No shift premium (Tunisia)<br><p><b>Travel -</b></p><br><br><br><p><b>Relocation -</b></p><br><br><p><b><span><span><span><span><span>Equal Opportunity Employer (EEO)</span></span></span></span></span> -&nbsp;</b></p><br><br><br><p>HP, Inc. provides equal employment opportunity to all employees and prospective employees, without regard to race, color, religion, sex, national origin, ancestry, citizenship, sexual orientation, age, disability, or status as a protected veteran, marital status, familial status, physical or mental disability, medical condition, pregnancy, genetic predisposition or carrier status, uniformed service status, political affiliation or any other characteristic protected by applicable national, federal, state, and local law(s).</p><br><br><br><p>Please be assured that you will not be subject to any adverse treatment if you choose to disclose the information requested. This information is provided voluntarily. The information obtained will be kept in strict confidence.</p><br><br><br><p>For more information, review HP’sEEO Policy or read about your rights as an applicant under the law here: “Know Your Rights: Workplace Discrimination is Illegal"</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: High school diploma or G.E.D equivalent.</li><li>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus.</li><li>Supervisory Experience: No supervisory experience.</li><li>License or Certification: Driver s License</li></ul><p></p></section>

<p>TERMES DE R F RENCE : Recrutement d un technicien en lectricit et nergie 1. Contexte Dans le cadre de la mise en uvre des activit s de coop ration entre la municipalit de Nabeul et ICU Tunisie, notamment dans les domaines de l effi cacit nerg tique, de l nergie solaire et de la modernisation des infrastructures communales, il est pr vu de recruter un(e) Technicien(ne) afin d appuyer la Direction Technique de la Municipalit de Nabeul dans la gestion et le suivi des activit s techniques quotidiennes et de suivre les projets de coop ration entre l ICU et la municipalit de Nabeul . 2. Lieu d affectation • 4 jours par semaine : Municipalit de Nabeul. • 1 jour par semaine : Bureau d ICU Tunisie. 3. Dur e de la mission Contrat dur e d termin e, conform ment la l gislation nationale. Dur e : 12 mois. 4. Responsabilit s Sous la supervision des Chefs de Projet et de la Direction Technique de la Municipalit de Nabeul, le/la technicien(ne) sera charg (e) de : • Supporter l quipe technique de la commune de Nabeul dans les op rations de maintenance : • des installations communales d clairage public : changement luminaires, diagnostic/r paration armoires lectriques, c bles lectriques • des installations lectriques des b timents communaux et des installations lectriques des infrastructures sportives communales. • Assurer le suivi technique des projets de coop ration ICU/municipalit de Nabeul. • V rifier la conformit des travaux r alis s par les entreprises prestataires. • Participer la collecte des donn es de consommation nerg tique des infrastructures communales. • Supporter l ICU dans l laboration des sp cifi cations techniques relatifs aux quipements lectriques et nerg tiques et la r ception des quipements et des travaux ; 5. Profil recherch Formation Dipl me de technicien sup rieur ou licence appliqu e en g nie lectrique ou lectricit Industrielle ou discipline quivalente. Exp rience professionnelle • Exp rience professionnelle comprise entre 2 et 5 ans . • Une exp rience av r e dans au moins un des domaines suivants : • R alisation des installations d clairage • R alisation et installation de syst mes photovolta ques ; • lectricit industrielle ; • Efficacit nerg tique • lectricit des b timents. Justificatifs requis • Attestations de travail justifiant les exp riences professionnelles mentionn es. • Coordonn es de personnes de r f rence (sup rieur hi rarchique ou responsable technique) pouvant tre contact es pour v rification. 6. Comp tences requises • Bonne connaissance des installations lectriques basse tension. • Connaissances des syst mes photovolta ques et/ou des quipements d efficacit nerg tique. • Capacit lire et interpr ter des sch mas lectriques. • Bonne ma trise d Excel (tableaux, graphiques, traitement de donn es), Word et PowerPoint. • Capacit travailler sur le terrain et suivre des chantiers. • Bonnes capacit s r dactionnelles et de reporting. • Sens de l organisation, autonomie et esprit d quipe. 7. Crit res de s lection Les candidatures seront valu es sur la base des crit res suivants : Crit re - Points Exp rience professionnelle g n rale (nombre d ann e) : 2 ou 3 ans : 10 pts ; 4 ans ou sup rieur : 15 pts Points: 15 Exp rience professionnelle pertinente (photovolta que, solaire thermique, clairage public, installations lectriques BT) Points: 45 pts Exp rience en suivi de chantier et supervision des travaux Points: 10 pts Entretien et motivation : • Entretien technique (Connaissances en lectricit , s curit , lecture de sch mas, diagnostic de pannes, clairage public, photovolta que) : 20 pts • Motivation et aptitudes personnelles : 10 pts Points: 30 pts Total: 100 pts How to apply 8. Dossier de candidature Les candidats devront soumettre : • Un curriculum vitae d taill ; • Une copie du dipl me ; • Les attestations de travail justifiant l exp rience professionnelle ; • Les coordonn es d au moins deux personnes de r f rence ; • Une lettre de motivation. 9. Date limite de candidature Les candidatures doivent tre envoy es au plus tard le 31 ao t 2026 l adresse suivante : EMAIL_ADDRESS , en indiquant dans l objet du courriel : DESAIN Candidature au poste de technicien en lectricit et nergie .</p><p><strong>Desired Candidate Profile</strong></p><h2>Profile Required</h2> <p><strong>Education</strong></p> <ul> <li>Diploma of higher technician or applied license in electrical engineering, industrial electricity, or equivalent discipline.</li> </ul> <p><strong>Professional Experience</strong></p> <ul> <li>Professional experience between 2 and 5 years.</li> <li>Proven experience in at least one of the following areas:<br><ul> <li>Implementation of public lighting installations</li> <li>Implementation and installation of photovoltaic systems;</li> <li>Industrial electricity;</li> <li>Energy efficiency</li> <li>Building electricity.</li> </ul> </li> </ul> <p><strong>Required Justifications</strong></p> <ul> <li>Work certificates justifying the mentioned professional experiences.</li> <li>Contact details of reference persons (hierarchical superior or technical manager) who can be contacted for verification.</li> </ul> <h2>Required Skills</h2> <ul> <li>Good knowledge of low-voltage electrical installations.</li> <li>Knowledge of photovoltaic systems and/or energy efficiency equipment.</li> <li>Ability to read and interpret electrical diagrams.</li> <li>Good command of Excel (spreadsheets, graphs, data processing), Word, and PowerPoint.</li> <li>Ability to work in the field and supervise construction sites.</li> <li>Good writing and reporting skills.</li> <li>Sense of organization, autonomy, and team spirit.</li> </ul>

<p>Releases the daily process in the Cutting Area. Performs requalification of applicators according to internal procedure (AA3117), including ultrasonic welding combinations and splice volt drop resistance. Ensures CMK, CPK and SPC studies for production equipment and processes. Elaborates and evaluates micrographs, performs equipment calibration, and maintains document registry. Validates requalification of manual applicators, cutting and crimping machines. Performs requalification per process (cutting, stripping, crimping, welding, twisting, shrinking). Conducts microsections and supports analysis of customer or supplier complaint samples. Performs additional tests related to quality, engineering, complaints, and machine commissioning. Ensures compliance with all applicable quality standards, norms, and HSEE requirements in the area of activity. Improves crimping qualification processes and laboratory usage, and elaborates micrograph catalogues for samples and product audits (e.g. customer specifics).</p><p><strong>Desired Candidate Profile</strong></p><ul><li>University degree</li><li>3 year of experience</li><li>Quality</li><li>Communication</li><li>Social &amp; intercultural sensitivity</li><li>Change management</li><li>Target &amp; result orientation</li><li>Motivation &amp; resilience</li><li>Self-organization</li><li>Conflict management</li><li>Teamwork</li><li>Adult Learning Theory</li><li>Blended Learning</li><li>ELearning Concepts</li><li>Skills and Competency Modeling</li><li>Training Management</li><li>Leadership Development Programs</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div><span ><b>Activities</b></span></div><div><span ><b>EXTERNAL RECRUITMENT</b></span></div><div><span ><b>Production Team Leaders</b></span></div><div><span ><br></span></div><div><span ><b><br></b></span></div><div><span ><b>Profile :</b></span></div><div><span >- Advanced technician level or equivalent</span></div><div><span ><br></span></div><div><span >- Having at least 2 years of experience in managing and leading production teams as a team leader</span></div><div><span ><br></span></div><div><span >- Possessing basic computer skills (Word, Excel, ERP, etc.)</span></div><div><span ><br></span></div><div><span >- Having practiced problem-solving and analysis tools</span></div><div><span ><br></span></div><div><span >Organized, rigorous, serious</span></div><div><span ><br></span></div><div><span >- Possessing the ability to manage conflicts</span></div><div><span ><br></span></div><div><span >- Possessing the ability to manage and communicate</span></div><div><span ><br></span></div><div><span >- Having the ability to manage stress</span></div><div><span ><br></span></div><div><span >- Possessing a good level of cross-functional communication</span></div><div><span ><br></span></div><div><span >- Able to work in 3x8 shifts.</span></div><div><span ><br></span></div><div><br></div><div><span ><b>Missions :</b></span></div><div><br></div><div><span >Reporting to the workshop manager, you will be responsible for:</span></div><div><span >To identify and prevent any situation that poses a safety and/or environmental risk</span></div><div><span >Ensure compliance with HSE-related rules and instructions in the workshop</span></div><div><span >Execute the production schedule while optimizing human and material resources.</span></div><div><span >Identify situations that impact the execution of the production schedule and the causes of delays in manufacturing orders.</span></div><div><span >Fulfill requests for materials/components to be supplied to the workshop</span></div><div><span >Initiate requests for intervention in case of machine breakdowns</span></div><div><span >Leading the gemba walks with the group leaders</span></div><div><span >Ensure compliance with the various production and quality instructions</span></div><div><span >Ensure compliance with the information in the various production records</span></div><div><span >Ensure compliance with the standards of tidiness and cleanliness within the workshop</span></div><div><span >Participate in the integration and training of production staff</span></div><div><span >Ensure compliance with the versatility matrix in the allocation of operations</span></div><div><span >Ensure the reliability of workshop stocks</span></div><div><span >Manage and lead production teams, and promote company culture and HSE culture within your team.</span></div><div><span >Being responsible for evaluating team members and conducting their EIAs</span></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Level of superior technician or equivalent</li><li>Having a first experience of at least 2 years in management and management of production teams as a team leader</li><li>Having basic computer knowledge (Word, Excel, ERP)</li><li>Having practiced problem analysis and resolution tools</li><li>Organized, rigorous, serious</li><li>Having the ability to manage conflicts</li><li>Having the ability to manage and communicate</li><li>Having the ability to manage stress</li><li>Having a good level of transversal communication</li><li>Able to work in 3*8.</li></ul><p></p></section>

<p><strong>Job Summary:</strong> CROWN Maghreb Can is seeking a highly motivated Production Technician to operate and maintain manufacturing equipment, ensuring efficient production and quality control of metal packaging products.</p><p><strong>Job Responsibilities:</strong></p><ul><li>Operate and monitor various production machinery and equipment, including presses, forming machines, and conveyor systems, adhering to safety protocols and operating procedures.</li><li>Perform routine inspections, preventative maintenance, and minor repairs on production equipment to minimize downtime and ensure optimal performance.</li><li>Monitor product quality throughout the production process, conducting visual checks and using measuring tools to ensure compliance with specifications and standards.</li><li>Troubleshoot and resolve basic equipment malfunctions and production issues, escalating complex problems to senior technicians or supervisors.</li><li>Load and unload raw materials and finished products, ensuring accurate material handling and inventory management.</li><li>Complete production records, logs, and quality control documentation accurately and in a timely manner.</li><li>Maintain a clean and organized work environment, adhering to 6S principles and company safety regulations.</li><li>Collaborate effectively with team members and supervisors to achieve production targets and continuous improvement initiatives.</li><li>Adhere to all company policies, procedures, and safety guidelines.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Qualifications:</strong></p><ul><li>High School Diploma or equivalent; a technical diploma or certification in a related field (e.g., industrial mechanics, electrical technology) is a plus.</li><li>Strong mechanical aptitude and ability to operate and troubleshoot production machinery.</li><li>Basic understanding of electrical systems and control panels is an advantage.</li><li>Ability to read and interpret technical manuals, blueprints, and production specifications.</li><li>Good communication skills, both verbal and written, with the ability to follow instructions and communicate effectively with team members.</li><li>Strong attention to detail and a commitment to producing high-quality work.</li><li>Ability to work independently and as part of a team in a fast-paced manufacturing environment.</li><li>Flexibility to work various shifts, including nights, weekends, and holidays, as required.</li></ul>